1963 Chevrolet Corvette

327/300 Horse

Manual

489727654

Rebuilt, Rebuildable & Reconstructed

1963 Corvette Split Window Frame and Running Gear You are reviewing a restored 63 Corvette frame complete with engine, transmission, rear end, gas tank, suspension front and rear. The body was used in a custom build leaving what you see left over. The frame and components were restored for future use with another body. It was decided not to move forward with the project and it was decided to sell it as is. Please read on for more particulars: Frame: The frame is rust free and in overall very good condition. Some slight damage to the left front part of the as it curves to clear the front suspension. The damage was repaired. Suspension: The front is restored with original sway bar restored. New A arm bushings, bumpers, etc. The rear suspension is restored. Rear spring is original and painted. Snubber replaced. Trailer arms restored. Brakes: Entire braking system has been restored including lines and hoses. Fuel system: Original tank restored including fuel lines. Engine: The engine is a stock 327/300 horse with the engine rebuilt and not ran. The carb is original and not rebuilt, but is in good running order. The car was running when the project began. The alternator and steering box, clutch fan, starter, fuel pump, and distributor are not restored. Fan, pulleys and other components freshly painted. Fan clutch original unrestored. New engine mounts. Original unrestored air cleaner. Transmission: The transmission is a Muncie M20 so the car was a later 63. Early 63’s used a T10 transmission. The transmission is totally rebuilt along with the clutch being replaced and the flywheel turned. Includes original unrestored shifter. Rear end: The rear end is stock and rebuilt. Driveline restored with new U joints. Summary: Nice set up for someone in need of a good frame, suspension and running gear for a variety of applications. Disclaimer: The frame is for sale locally. The owner has the right to cancel the auction at any time for any reason. No warranties or guarantees are expressed or implied with the car being sold in "AS IS" condition. No title. Feel free to call me to discuss the particulars. Gary 509 993 6918 On Oct-09-14 at 16:04:49 PDT, seller added the following information: Added note: The wheels are original 63 wheels in good condition. No paper work or title.On Dec-17-14 at 14:00:20 PST, seller added the following information: Correction: the engine is a 250 horse, not a 300On Dec-20-14 at 13:34:54 PST, seller added the following information: After further inspection here is some additional information a potential buyer needs to be aware of. Sorry for not initially posted this information: Trans case stamp: Hard to read due to the roughness of the casting. I can’t make out a P, but here are the numbers: 3114708, case casting number: 3831704, side cover casting: 3831707, tail housing: 3831731 Carb: 3721 Exhaust manifolds: 3797901 and 3797902. Block: 3789817, which is a 62 to 67 327 truck block, not Corvette. Bell housing is: 3788421 VIN: 30867S114708 (so you are aware if the build time frame) Casting date: F2262 (June 22, 1962) Modified 63 Hood and set of seats are available separately. On Dec-20-14 at 14:07:10 PST, seller added the following information: Next bid of 10,200 meets reserve. Bid to win