1980 Honda Other

pc01e2110329

Clear

Hello, here's a cx500 I've been building for the last year on and off.The work done is as followedThe tank was fitted from a gl500. I sanded and then clearcoated, to keep the rad patina.The rear of the bike removed and rebuild for cleaner lines and added a upswept hoop in the rear. Relocated key/push button under seat. Aluminum over flow mounted to frame.lightweight Anti-gravity battery mounted under engine.Powder coated framePowder coated wheels,Vintage Avon speedmasters tiresCustom leather seat wrapped to a aluminum seat panNew Piston ringsHeads resurfaced/ pressure tested, new valve seats.All new seals, including rear cam seal.Custom build 2-1 exhaust Rebuilt carbs and rejetted for 2-1 exhaust. With velocity stacks.New clutch.New fuel pitcock.Front fork has progressive springs, with new seals and heavier oil.Front caliper upgraded to dual piston with stainless brake line.Rear shocks are emgo classics.Single Speedo, led oil and neutral light. Cb750 headlight. Drag handle bar,New clutch/ hand controls.Will included second set of slightly higher handle bars.This bike is pretty badass. A total post apocalyptic walking dead/bellflower Darrell Dixon bike. That wasn't my original intention with the build,but I like how it came out. Runs good and is fast, it weighs nothing. Shaft driven aircooled great starter bike. i can deliver for a fee on the west coast. Bike is listed locally, i may end the auction at anytime.On Jan-25-18 at 20:36:15 PST, seller added the following information: Hello, here's a cx500 I've been building for the last year on and off. The work done is as followed The tank was fitted from a gl500. I sanded and then clearcoated, to keep the rad patina. The rear of the bike removed and rebuild for cleaner lines and added a upswept hoop in the rear. Relocated key/push button under seat. Aluminum over flow mounted to frame. lightweight Anti-gravity battery mounted under engine. Powder coated frame Powder coated wheels, Vintage Avon speedmasters tires Custom leather seat wrapped to a aluminum seat pan New Piston rings Heads resurfaced/ pressure tested, new valve seats. All new seals, including rear cam seal. Custom build 2-1 exhaust Rebuilt carbs and rejetted for 2-1 exhaust. With velocity stacks. New clutch. New fuel pitcock. Front fork has progressive springs, with new seals and heavier oil. Front caliper upgraded to dual piston with stainless brake line. Rear shocks are emgo classics. Single Speedo, led oil and neutral light. Cb750 headlight. Drag handle bar,New clutch/ hand controls. Will included second set of slightly higher handle bars. This bike is pretty badass. A total post apocalyptic walking dead/bellflower Darrell Dixon bike. That wasn't my original intention with the build,but I like how it came out. Runs good and is fast, it weighs nothing. Shaft driven watercooled great starter bike. i can deliver for a fee on the west coast. Bike is listed locally, i may end the auction at anytime.On Jan-26-18 at 23:28:42 PST, seller added the following information: please note the bike is watercooled. i justed notice the typo