1971 Chevrolet Cheyenne

454

Automatic

Clear

Here is a factory 1971 Cheyenne Super not a made up conglomeration of parts. This truck was brought from Arkansas and has never seen snow that I know of. This truck has been outfitted with a brand new factory style Hounds Tooth seat cover and ACC Loop carpet. Carpet underlayment consists of the supplied Jute and the whole floor was covered in a Reflix-it style material. New stainless steel sill plates to finish it off. The door panels have been changed over to the 1972 style. This is an original A/C truck but the A/C is not working. New weather stripping around the Doors and Felts around the Door Windows. I replaced the Windshield Gasket too with the correct style. Everything but the Radio and the A/C work. The radio may I just never tried it. It is the OEM Am radio The suspension on this truck has been upgraded to KYB Shocks on all four corners. The Body Mounts have all been changed to Poly-Urethane along with the Front and Rear Sway Bar mounts. The Front sway Bar has been changed to a 1.5 and the Rear Bar is a 23 mm from an IROC Z. The front and rear have been dropped using CPP springs 4.0 in the Rear and 3.0 in the Front. The Rear also has a CPP adjustable dropped Panhard Rod. I also installed a Power Trax locker in the rear of this truck, it still has the original 3.08 Rear Gears. Wheels are a Coys 5 spoke design 15x8 in the front dressed with 255 50 15 and the rear 15x10 dressed with 275 60 15. The tires are the same widths 10.5 but run a different diameter 28 in the rear and 26 in the front. Brakes all re built in the rear from the backing plate out to the drum. This truck is extremely tight with no rattles and goes down the road nice and solid. The suspension is set-up very nice. It rides smooth like you would expect it too not choppy and corners with ease. The cornering is very predictable and easily managed. Exhaust starts off with Hooker Super Comp long tube headers, dumps into a Pypes Stainless Steel dual exhaust system that exits in the factory locations behind the rear tires. Most of these updates have been in the last year or driving season for us in Maine. The engine is a rebuilt 454 its been bored .04 and has an aftermarket Crank kit. Its a very streetable engine. Rods resized and rings are filed to fit.CL 77 bearings with a Melling M77HV oil pump to complete the bottom end. Keith black..04 over 9.0:1 pistons. Aluminum heads Roller Rockers, Comp Cams adjustable guide plates, Comp Cam's cam custom ground for this truck, Performer RPM intake, and Edelbrock 850 cfm Thunder Series carburetor. Transmission is a rebuilt th350 shift kit with a converter 2100rpm Paint was done about 15 years ago and still looks good. This is a very dependable truck that I drive to and from work occasionally. about an hour or so each way. It does have a big 4 core radiator and has no overheating issue or bad manners sitting in traffic. I built this truck to drive. Yes this is a HOT ROD and you will not be disappointed with it. it does behave very nice and I let my 24 year old daughter drive it is that nice to drive and is manageable. key words C10 Cheyenne Cheyenne Super Chevelle Corvette Rat Rod On Jul-28-14 at 19:48:58 PDT, seller added the following information: THIS IS FOR SALE LOCALLY AND THE LISTING MAY GET SOLD BEFORE THE AUCTION ENDS. IF THE TRUCK GETS CLOSE TO MY LOCAL PRICE I WILL LET IT RIDE TILL THE END OF THE AUCTION.On Jul-29-14 at 07:08:19 PDT, seller added the following information: some answers to questions Arkansas truck and I also have the paper work from when I had it shipped in 2011 to me in Maine. I also have the wood grain inserts for the door panels,PO1 hubcaps and some other parts stored