1976 Toyota Land Cruiser

SUV

8 cylinder Chevy 350

Manual

FJ40210951

Clear

Gasoline

I originally bought this truck when the odometer read 9400 miles, since then I had installed a secondary tank in the main cabin under the passenger seat, last november i took it to get a complete revamp of the engine and drivelines all receipts can be included and made available. The below description is what was done back in 2006. I have had the truck since 2010 and have only put 10,626 miles on the engine, and it runs like a champ. A very reliable truck always cranks up even with the recent ice storms, never ceases to amaze me. I hate to get rid of her, but we are expanding the family and will need to start down sizing some of my toys. Please see the details from the original restoration by Rocky Mountain Cruisers. RMC Outback Roof RackRMC Outback Bush Guard6 KC Daylighter Lights with stone guardsRear Pro Comp Work LightsRMC Outback Swing Away Rack SystemSafari Snorkel9500 lb Warn WinchSteel Horse Super SeatsBushwacker Fender FlaresRock Crawler Steel WheelsTuffy Security ConsoleRMC Overhead Console were added to this FJ40. This vehicle is equipped with a new Chevy Small Block Engine and GM Serpentine Belt Drive System, and a 5 speed Toyota Transmission with front disc brakes. Cruiser comes complete with Vintage Air Conditioning, AGR Power steering System, factory roll bar, front Steel Horse Super seats, rear jump seats, rear heater, Tuffy Security Console, and AM/FM/CD. During the restoration the rear quarter panels, and front fenders were replaced. The cruiser was then primed with 4 coats of high build primer and painted outside with 5 coats of Martin Senour Acrylic Enamel Freeborn Red paint. The interior was painted to match and then 4 coats of bedliner were applied to the floors. The dash was recovered and a clinometer was installed. New quarters and inner fender wells were installed and finished. Rear channel was completely rebuilt. Body tub was cleaned, primed and undercoated. Interior of tub was cleaned, primed, painted, and then 4 coats of liner were installed. The engine was topped off with Edelbrock Multi Port fuel injection. A custom exhaust was built. Suspension work was completed with a Skyjacker 4" lift and Rancho RS5000 shocks. Greasable shackles, pins, and ubolt skid plates were all installed. The following is a list of parts that were replaced and services that were performed during the restoration process. Parts Replaced High quality front turn signals and tail lightsFront bumperFront door window channelsWeather stripping all doorsFront, side and rear emblemsRear reflectorsShifter knobsNew poly tankDash coverRecovered jump seatsNew headlinerNew Aussie vinyl mat kit (front and rear)Fan beltsHeater hosesOil and oil filterSpark plugsCapRotorWiresAir and fuel filtersShocksSkyjacker 4" lift kitFront axle seals (inner and outer)New rotorsFront calipersPadsShoesNew brake hoses and brake linesAll new wheel bearings front and rearTie rod endsWheel cylindersHeavy duty clutch kitKnuckle seals Transmission and transfer case were rebuilt and reinstalledComplete cooling system was replaced and new fluids addedCharging system testedNew battery and battery tray installed