1966 Chevrolet C-10

short wheel base pick up

402 chevy big block

turbo 350

C14465157565

Clear

edelbrock 750

1966 CHEVY TRUCK 402 Big Block/w Turbo 350 3:73 Rear end Gears New Eagle rotating assembly .020 over complete long block done by jims engines shop in Hensley Ark. The operating temperature is 210-220 the oil PSI is 40-55 and the mileage on the rebuild is 250 miles. All the bugs are worked out of the engine and sounds awesome with the dual flow masters. Has a Haden pusher cooler fan and a Haden trans cooler for added protection. I installed a new battery with a reconditioned battery tray and tie down new starter. The heater core has been replaced with an LMC truck core along with a four core aluminum radiator. Has an Edelbrock 750 carb with the electric choke for easy starting and running along with an Edelbrock 2-0 performer intake. The front end has been cleaned and all worn parts replaced. Right and left Fenders have had the bottoms replaced along with the inner support mounts. The rocker panels were cut out and replaced along with the floor and rocker backing panels were removed and replaced. The old rocker panels and backing plates are new replacement parts from Bow Tie Bits. The rear cab mounts were cut out and replaced. All windows open and close Doors lock and unlock from inside and outside on Drivers side. All lights work and the backup lights are original and Glass. The turn signal switch has been replaced with a brand new one from LMC Truck. The seat has been reworked by Ace top shop in Little Rock with new foam and the seat material has been replaced the center of the seat has been notched out for the B&M Shifter on the floor. comes with the original jack and crank handle mounted under the seat. The front tires are new ventus H101 hancook 265 50 R 15, The rear tires are new performance GT grand prix 295 50 R 15. The rims are 15x8 and 15 x 10 in the back. Brakes have new shoes, springs and the wheel cylinders are new all the way around with new hoses and some new brake tubing where needed. The Master cylinder is new with an original power Brake booster. Mirrors are aluminum side mirrors, sun visor was replaced with a new visor from Bow Tie Bits. window tint is 5% all around keeps it cool inside. A new chrome rear end cover was installed and new fluid wheel seals and bearings were installed. new alloy axles replaced the old axles this combination will melt the tires off the truck if you desire. Awesome for 1/8 mile racing. The oak bed has been reconditioned with stainless steel strips and nut n bolt kit. Installed a new cab mounting kit for the extra new feel of the truck ride feels very nice and smooth going down the road. New carpet and sound deadener has been installed for looks and quietness and heat protection from the dual flowmasters and pipes. The front and back window rubber seals have been replaced. The cab door seals are new along with the rubber bumpers for a quiet and rattle free ride. car truck show winner. I have a lot of hours and money in this vehicle.The starting price is the average sale price of this type truck most of those trucks were rusted out and incomplete the buy it now price is below the market value and well below insured value. very nice cruiser thanks for looking