1963 Mini Classic Mini

1275cc *NR* Coupe

4 - Cyl.

Manual

Gasoline

Done: Removed all rust and bad metal from chassis and underside of car Replaced all suspension bushings New Ball Joints New floor pans 2 New Rotors Cleaned and Painted 2 New Brake Pads Cleaned and painted drive shafts and new seals (Front wheel Drive) Cleaned acid treated and painted sub frames and floor pans New shocks Refinished Front suspension Refinished Wheels and Hubs New Tires Replaced Trunk pan and rear bonnet There's probably 50 other things I can't remember. basically disassembled, cleaned, acid treated and POR-15 (paint) the whole suspension and undercarriage of the car. If your not familiar with POR 15 its about $50 a quart and is the best enamel rust prevention frame paing there is. Used about 5 quarts on the car. Interior It needs to have the carpet, seats, dash, etc put back together. You might want new gauges new dash. Stuff is cheap though. Has New carpet and new seats Exterior Needs paint. Put headlights, tail lights, grille back on. Needs front windshield. Drive train Put intake carb back on connect drive shafts to u-joints on tranny (I have new u-joints). Hook up shifter (Might need a couple of parts) Cheap. Install Radiator hoses etc. (Need new ones) Cheap Install Gas tank and fuel pump (I have these) Install brake lines and master cylinder (I have these) Needed parts window tracks for front windows they are pretty rusted. Maybe shifter parts Radiator hoses Turn signal switch Dash if you want to replace it Gauges I have the old ones. Front side windshields ( I have back) Also have sides but they are frosted from age. Odds and ends I have a lot of parts. Car is all in primer except for the hood also if interested for extra 2500 dollars can have car painted any color of choice after purchase I have a certified Paint Technician quoted me this price. Seats are black and yellow and have Mini stitched in them I would be willing to negotiate delivery for an out of state buyer price will depend on location and mileage your welcome to have it picked up as well Let me know if you have any other questions. There is a Rust hole on the driver door as well as bottom driver quarter and on the rocker panel of the driver side