1966 Plymouth Belvedere 2

Belvedere -

8 - Cyl.

Automatic

RH23D67153434

Gasoline

Originally a 273ci car, it now has a 440ci bored .30 over, Probe forged pistons, 6 pack connecting rods, Indy 440EZ cylinder heads, roller rockers, 770 Demon carb. Intake has been port matched to the cylinder heads, headers (wrapped), 7qt oil pan with pick up. Transmission is a freshly rebuilt 727 torque flight with Big End torque converter with 1000 stall. Rear end is 8 3/4 with 3.23 sure grip 741 housing. Prostock springs, sub-frame connectors, new shocks (stock), Engine tie down strap, aluminum therma cool radiator with electric fan for traffic and a clutch fan. Transmission cooler, new fuel tank and sender, Taylor battery relocation kit, high torque starter, wheels are Chrystler 15X7 RR and 16X6 FR with BFG G-force radials. All glass is good with the expected wear and tear no cracks, all molding is present with the exception of the windshield. Bumpers are present, but need to be replaced (they are not straight) Floor pan has been replaced in the typical places, trunk is solid, QTR's have been replaced. Paint is good driver quality. There is a chip in the paint in the drivers side door at the seam. All lights work. I'm sure I've left out many details. I've worked countless hours on this car getting it where I want it. My wife and I have taken several road trips in it as far as the Smokies and to Minnesota from our home in Indiana. We have camped out of the trunk on more than one occasion.... hauling our tent and supplies and just taking off with no particular place in mind! It is dependable and fast. Have acquired two beautiful little boys since the project began and more projects than time. They seem to like the woods and the "monster truck jeep" we bought last year, so time to get rid of a few toys to finance the others! This is a good candidate for someone wanting to go all out. It comes with the trim that was on the car when I got it and an extra drivers side door. The interior is clean, but unfinished. It will need a headliner, it's there but has been sewn up by my wife and taped in areas. I have the dash pad which needs recovered as well as the pad for the drivers side door. It has carpet in it, but not the right fit. You can shop around and figure out approx. what I have invested. I'm gonna miss this one!On Feb-28-11 at 11:39:13 PST, seller added the following information: Originally a 273ci car, it now has a 440ci bored .30 over, Probe forged pistons, 6 pack connecting rods, Indy 440EZ cylinder heads, roller rockers, 770 Demon carb. Intake has been port matched to the cylinder heads, headers (wrapped), 7qt oil pan with pick up. Transmission is a freshly rebuilt 727 torque flight with Big End torque converter with 2500 stall. Rear end is 8 3/4 with 3.23 sure grip 741 housing. Prostock springs, sub-frame connectors, new shocks (stock), Engine tie down strap, aluminum therma cool radiator with electric fan for traffic and a clutch fan. Transmission cooler, new fuel tank and sender, Taylor battery relocation kit, high torque starter, wheels are Chrystler 15X7 RR and 16X6 FR with BFG G-force radials. All glass is good with the expected wear and tear no cracks, all molding is present with the exception of the windshield. Bumpers are present, but need to be replaced (they are not straight) Floor pan has been replaced in the typical places, trunk is solid, QTR's have been replaced. Paint is good driver quality. There is a chip in the paint in the drivers side door at the seam. All lights work. I'm sure I've left out many details. I've worked countless hours on this car getting it where I want it. My wife and I have taken several road trips in it as far as the Smokies and to Minnesota from our home in Indiana. We have camped out of the trunk on more than one occasion.... hauling our tent and supplies and just taking off with no particular place in mind! It is dependable and fast. Have acquired two beautiful little boys since the project began and more projects than time. They seem to like the woods and the "monster truck jeep" we bought last year, so time to get rid of a few toys to finance the others! This is a good candidate for someone wanting to go all out. It comes with the trim that was on the car when I got it and an extra drivers side door. The interior is clean, but unfinished. It will need a headliner, it's there but has been sewn up by my wife and taped in areas. I have the dash pad which needs recovered as well as the pad for the drivers side door. It has carpet in it, but not the right fit. You can shop around and figure out approx. what I have invested. I'm gonna miss this one!On Feb-28-11 at 12:05:45 PST, seller added the following information: Okay.. not sure what I did here... but the bottom line is that the stall is a 2500 stall... not 1000. Sorry! It was a typo. Don't know why there are 2 copies of the decription. That is the only change. Thanks