1973 Plymouth Barracuda

CUDA' Coupe

8 - Cyl.

Automatic

BS23H3B375733

Gasoline

Up for auction is one of the nicest 1973 CUDAS I have run across in a long time. Not no rust bucket flinstones frame rail coroded neededing every pieace of sheetmetle on the care replaced CUDAS that are left out there. The car has been stored indoors for the last 29 years by the orignal owner. The shell, sub frame, frame rails and trunk are in excelent condition. Serface rust only. As you can see from the photos, it will need 1 lower quarter and 1 whole quarter as my inspection uncovered bondo in the front of the left rear wheel that I have cut out. Depending on your frabrication skills maby outer wheal housings and trunk extenshions or some very light patching to them before installing the Qs. Like I said, this is a numders matching 340 Auto Factory Air power stearing W/ power front disc brakes CUDA'. I have 99% of the orignal parts and peaces along with some new and remanufactured parts to ease the restoration. The Transmission was rebuilt by me some years ago and is still wraped and sealed with the orignal torque converter that was R&Red by a profeshional remanufacturing facility. The motor was gone through, compreshion checked, with new timing componets, fuel pump esentric, oil pump, and all gaskets and seals less the head gaskets then painted with the correct mopar blue high-temp engine paint. On the motor is a new fuel pump, water pump, power stearing pump, choke and a remaned altinator. The radiator is the orignal that was sent out tanks checked and recored. The carboretor that was on the car (not the orignal) and a remanufactured one both go. I have a complete and new front suspenshion rebuild kit, new carpet kit, new glove box liner, new lower valance incert and motor mounts. The only thing I have found missing is the spair tire and jack, raido and the orignal steel rims but I do have 6 super nice hub caps to go on the orignal rims for the correct restoration. I have other projects going on and just don't have the time for this one. I would estimate that this project would take less then 400 hours for a compident shop or person to compleat. Don't let this beauty slip away. Where else are you goin to find a # matching CUDA' theese days! I have more photos so just ask and I will send them to you. This is a NO RESURVE auction. This car is also for sale loacaly so I resurve the right to end it up to 24 hours before auction close. Good luck and happy bidding.