1967 Chevrolet C-10

350

Automatic

000000000000

Clear

1967 CHEVROLET C10 / K10 PICKUP THIS TRUCK STARTED AS A YELLOW 6 CYLINDER I BOUGHT THE TRUCK BACK IN APRIL OF 2014 SINCE PURCHASE I HAVE COMPLETED A FRAME SWAP ONTO A 1976 K10 FRAMEINSTALLED NEW SHEET METALNEW CAB CORNERS AND INNER/OUTER ROCKER PANELS ON BOTH SIDES OF TRUCKNEW FLOOR MOUNTS ON ALL CORNERS EXCEPT PASSENGER FRONT SIDEVERY STRAIGHT BODY LINES ALL RUST CUT OUT OR REMOVED BY GRINDING AN SANDING FRAME WAS GROUND TO BARE METAL AND COATED WITH RUST CONVERTER AND GLOSS BLACK FRAME COATINGENGINE IS A 85-95 MODEL GM (ENGINE VIN)ENGINE WAS REMOVED AN THE FRAME WAS GROUND TO METAL AND COATED CAB WAS SANDED TO BARE METAL AND PRIMED AND PAINTED WITH FLAT BLACKAXLES WERE REMOVED, GROUND TO BARE METAL AN PRIMED IGNITION IS PUSH BUTTON WITH KILL SWITCHHEADLIGHTS ALSO ON TOGGLE SWITCH FRONT DISC BRAKESGM 350 4BBL TH 350205 TRANSFER CASE3.73 GEARSMANUAL LOCKING HUBS NEW :BODY MOUNTSALL METAL WORK MENTIONED ABOVEHOLLEY DEMON CARBALL NEW FLUIDS (BRAKE, OIL, TRANSMISSION)BRAKE PADS6 IN ROUGH COUNTRY LIFT NEEDS:TAIL LIGHTS WIREDTRANSFER CASE SHIFTERREAR BRAKES CONNECTED AND BLED (BLEEDER SCREW IN PASSENGER REAR NEEDS REPLACED, REAR BRAKE LINE {1 INCH FROM MASTER CYLINDER} NEEDS REPLACED TO COMPLETE REAR BRAKE SETUP)LONGER SPEEDOMETER CABLENEW TIRES CAN BE DRIVEN HOME!I WOULD TRAILER JUST TO SAVE GAS (DEPENDING ON DISTANCE)PICTURES SHOW EVERYTHING OVER 10K INVESTED IN BODY WORK AND NEW PARTSEXCELLENT RUNNING TRUCKDRIVE AS YOU COMPLETE RESTOREALL THE HARD WORK IS DONEMECHANICALLY SOUND RESERVE IS UNDER HALF THE MONEY INVESTEDSELLING FOR DOWN PAYMENT ON NEW TRUCK On Dec-30-16 at 15:20:05 PST, seller added the following information: UPDATED: brake line is fixed. Brakes work