1994 Toyota Other

22-RE

Manual

4TARN01P0RZ158413

Clear

Gasoline

Up for sale is my 94 Toyota Pickup. It has been VERY well maintained, and never abused. The truck has very little surface rust on bare metal surfaces but no body rust. One of the cleanest bodies I've seen on a truck like this. There is a bed-liner, but was removed to show how clean the bed is under the liner in pictures, as you can see rust free bed. The AC blows cold, but could use a slight charge. I replaced all of the schrader valves in the AC as well, so it should be leak free for a long time. Smoke free household and the previous owner didn't smoke either. New parts on the truck within the past year: WARN 68451 Rock Crawler Bumper TubeWARN 68450 Rock Crawler Front BumperWARN 68490 Rear BumperSmittybilt X20 Comp Series Winches 98380 - 8000 LB Winch with synthetic rope (this alone was over $600)Pro Comp 7069 Series Alloy WheelsKenda Klever M/T KR29 265/75R16Bilstein 4600 series shocks on all 4 sides (Great ride)New Japanese OEM 555 front upper and lower ball joints (not the garbage Moog stuff)New Front sway bar links and sway bar bushingsNew tie rods inner and outerRedline grease in all of the U-joints recentlyNew steering dampenerNew batteryNew BatteryNew rear axle seals.New front brakesNGK spark plugsNGK plug wires, new rotor and cap as wellRecent oil changeRecently changed trans/transfer case fluid and front axle as wellNew Headunit /speakersPlus much more that I can't remember. Unaddressed issues:Above the dash, the top cover was cracked, and is now missing after trying to fix the crack.There is a tear in on the drivers side of the seat, only about 4" and it currently has a seat cover which looks great.The speedo does not register speed any longer. Was working when I purchased the car about a year ago, but now doesn't. The dash shows around 167k, and it likely is within 5k of that number. I tried to fix it myself thinking it was a bad gear in the speedo unit, but it was not the case, and I ended up breaking the speedo needle in the process. These units are around $200 to purchase, I don't have the time to fix this at the moment. I have been VERY meticulous with the parts going into this truck, as well as the work into it. Feel free to ask any questions. Thank you.