1993 Mazda RX-7

LS1 5.7 liter

Manual

jm1fd3310p0206031

Clear

1993 Mazda Rx7 R1186k on chassisVIN:Clean TitleBlack exterior with Black interiorLocated: St. Petersburg FLany question please text or call 727-455-411Five Engine/Fuel system: Stock 2001 LS1 with 78k out of an 01 z28Improved racing oil baffleSupra tt Fuel PumpCorvette Fuel Filter/FPR Exhaust:JTR 1 3/4 Long tube HeadersVibrant 3” resonatorCustom bent 3” exhaust to a Magnaflow Muffler Transmission/drivetrain:T56 6speedCenterforce dual friction clutchtick speed bleederGto shifterCustom Driveshaft Suspension/wheels:Koni Race coiler with eibach springs(not sure of spring rates)Big aftermarket sways(Unknown Brand) Improved Racing Endlinks17” Sparco RTT/ Brand New Nitto 555’s Outlaw Front BBK Misc: Samberg LS engine/tranny/rearend mount kitAutopower Rollbar powder coated silverR145 Sparco steering wheelJdm Fd seatsrelocated battery to passenger rear binFloor,tunnel,and rear bin area dynalined and dynamatted Trans tunnelkoyo fd radiator mounted upright with custom bracketspez modified harness with basic startup tune cpm with vats removedturnone reducer and custom power steering hose Exterior:The exterior condition is fair, there are two decent size dents , one above the driver side skirt in the rear and one on the driver side quarter close to the hatch. the paint shows wear for its age , the roof is starting to fade a bit. Interior:the interior condition is not the best, common for these cars most of the plastic pieces break including the door handles , center console. previous owner cut bottom The bad/what needs to be done-The car runs and drives but only having a startup tune it runs rich and needs to be retuned to remove the evap codes and get it running right.-The engine bay was painted dark blue(not the best) with the end game of painting the whole car.-The tach works sporadically and the speedometer digital dakota is not hooked up. the rest of the gauges work.-The car does not have factory seatbelts, the previous owner removed them and welded brackets to the trans tunnel and under door for harness eyelets -previous owner cut seat rails in floor to install the jdm fd seats to mount them on the floor-The windshield is cracked in two spots.-The horn does not work-the rear spoiler was removed and holes were plugged with grommets-intake needs to be finished I bought this car two years ago in hopes of making it a fun street/autocross car ,right now being busy with school i don’t have the time or money to complete it, but all the basics are there to make it decent car it just needs to have the issues sorted out.