1979 Pontiac Trans Am

Coupe

Pontiac 400 w/ram air 3 heads

Turbo 350

2X87K9L181749

Clear

Gasoline

This is a 10th anniversary Trans AM. The body is very straight. The front end needs alignment. It has new poly body bushings. It has lots of oem parts, new seatbelts, door handles, new complete decal kit. The glass trim has been powder coated gloss black. New hardware behind the headlights, new stainless steel bolt kit that I haven't used (I like factory style bolts). It has a fresh 400 Pontiac engine with ram air 3 heads with 72cc chambers, big valves, pocket ported, roller rockers, push rod guides and screw in studs. These are vintage code 12 heads that I have seen sell for over $1000 by themselves. The engine is a fresh rebuild with new bearings, oil pump, pistons, small performance cam, holley 650, aluminum intake, headers, hei distributor, electric fan, cheap set of wires and valve covers that came with the motor. This engine should make near or at 400 hp. The car has been covered with epoxy primer sealer. It needs good interior and weather stripping. I still have all interior pieces also the rear glass. It does not have a front windshield or center spoiler, headliner or t-top handles. Tires are old and need to be replaced but good enough to move it around. It comes with all bolts, shims and hardware to assemble. It also comes with two sets of T-tops (one set is mirrored one set is not), two hood scoops (one 79' one 73'?). Also have the spare tire and jack. There are more parts than listed or shown in pics. Everything I have pertaining to this car comes with it. Im selling it for a down payment on a house, if it wasn't for that I wouldn't let it go. On Feb-04-14 at 21:30:07 PST, seller added the following information: 99% factory straight, fresh 400 Pontiac engine with 1970 trans am or gto judge heads, also the correct decal kit for the 10th anniversary edition ta, correct mirrored tops with worn t-top bags. I only found two quarter size hole in the body ,one in the t-top channel and one in the door seal area. also a few pin holes in the floor pan. also added a couple more pictures