1986 Toyota Corolla

GTS clone Coupe

1.8L 20V TURBO

Manual

JT2ae86S8G0229512

Clear

Gasoline

This is my baby and it kills me to have to sell it but kids and adulthood dictate this decision. This car started life as a 1986 corolla sr5 with a 4ac engine. I purchased it in 2006 and tore it apart. I completely disassembled the car and did a complete body restoration on it. It is 100% steel except for the body kit and the front bumper support which is custom aluminum. The car was never completed but I have everything to finish it except for carpet and some odds and ends and time. The following is a list of what has been done and a list of parts. I also have a clean and clear title in my hand.1996 7afe shot block. custom rods with 4agze pistons and a 4age 20v head. ARP main studs and head studs. HKS head gasket. Stainless exhaust turbo header. individual throttle bodies. Ported dsm t28 turbo, and a custom crank pulley with a degreable EDIS trigger wheel and custom made degreable cam gears.The transmission is a W56 sitting on a paradise W-trans to A-engine bellhousing and connected to a brand new clutchnet stage 3 clutch. I have over $1000.00 into the trans, clutch, and bellhousing.It has a Walbro 255 mounted in a GTS gas tank.The engine mounts were cut and the engine was moved back 2 inches. The driveshaft is a brand new steel custom length piece. The rear end is a stock drum brake rear. This is the only thing that should be upgrated.The rear suspension is all alluminum rods with heimjoint ends.The front suspension has boxed control arms and urethane control arm bushings with tein tension rods and T3 roll center adjusters.The rear shocks are KYB AgxThe front struts are KYB Agx for a sw20 mrs with T3 adaptersAll 4 springs are Eibach It has front struts that are mounted on tein camber plates.The paint is very good but the clearcoat is peeling on the hood and trunk and the front and rear bumpers were never painted. The body is all steel and is straight as an arrow.It comes with a 3 core half length radiator and an oil cooler and a remote oil cooler kit.It has an aw11 mr2 steering rack with T3 delron mounting bushings.It has a pair of Jamex seats that should be recovered.It has a brand new intercooler and plumbing. The throttle bodies have been drilled for top feed injectors and it has a custom fuel rail.The interior is apart and the brake lines are not installed. It basically needs to be put together. I have boxes of parts.I also have a GTS gauge cluster and a wllwood adjustable proportioning valve and a summitt line lock that need to be installed.There is probably more that I am missing.I have every thing to put the car together and have 1 bad ass Ae86The only thing I dont have is engine managment. It has a custom pulley with an EDIS wheel that is set up for megasuirt 2.It also needs carpet and the dashboard is cracked. The headliner could use a recover and the door panels are In OK condition. The car has no AC or heat and all of the sound deadener has been removed.Please ask any questions if you have them.This car could be finished in a week if a couple of guys jumped on it and put in some elbow grease.The last 4 pictures are of when i got the car in 2006 and during the restoration.Do not try to scam me. I will not fall for any scams. I will ship the car anywhere in the world as long as I have cash in my hand and the buyer pays for and arranges shipping. I will be happy to help load the car and parts.