1986 Chevrolet

CS Hatchback

4 - Cyl.

Manual

1g1tb08cxga179148

Gasoline

Hello and thanks for looking at my 1986 Chevy Chevette CS. The Chevette is a 4 cylinder 4 speed 2 door model with grey interior. In my opinion the best combination that a chevette could be. If you have experience with chevettes you know they have a few problem areas. All of these areas have been fixed the right way, all of the details are listed below. -Bottoms of the doors are completely fixed with all new metal welded in -Floor pans are fixed with all new metal welded in, 2 patches were needed -Car has no rot or rust, it has all been fixed -Car was just painted on Friday (9-2-11) -Car was completely reassembled on Friday (9-9-11) -Car was sanded to 100% complete bare metal before being painted -Car was primered with 3 coats of primer -Car was wet sanded with 500 grit paper between each coat -Car was primed with 1 coat of a sealer primer and wet sanded with 500 grit paper 1 last time -Car is painted high gloss black -Car has new master cylinder -Car has all 4 new tires -Car has new exhaust -Car has all new light bulbs -Car runs and drives excellent -Car could use a good interior scrubbing -Car could be wet sanded and buffed once the paint cures, there is some dust in the paint since I do not have a professional paint booth -Car has some dings I missed while doing the body work, black paint is very very unforgiving -Title says mileage is 180,000 but the odometer only reads about 76,000. This car is in WAY too good of shape to have more than 76,000 miles on it. I think there was a mistake made when the title was transferred before I got it. -Car has a clean and clear PA Title!!! Overall the car is in amazing condition and runs excellent. If you have any questions please feel free to contact me. Please keep in mind the car is 27 years old and it is a chevette, not a show car. It is not perfect but is a really nice car. My name is Dave and I can be reached at 724-777-6416. For a small additional fee I can throw in an 8 point roll cage made specifically for a chevette. I paid extra for the back seat saver so the rear seat can still be used when the 8 point roll cage is installed. I also paid extra for the bolt in conversion kit so it can be bolted in or welded in. For a small additional fee I can also throw in a 5 lug bolt pattern 11inch drilled and slotted disc brake rotor conversion kit for the front. This kit was custom made for a chevette and will greatly improve the factory front disc brakes. Dave 724-777-6416 Thanks for looking!On Sep-11-11 at 08:39:41 PDT, seller added the following information: Just spent 2 hours scrubbing the interior, WOW, what an amazing difference! I plan on doing this again tomorrow and I am sure it will look even better!!!On Sep-14-11 at 03:26:46 PDT, seller added the following information: Reserve Drastically Reduced!!! Car MUST Sell!!!On Sep-15-11 at 18:15:11 PDT, seller added the following information: Reserve is $1,200!!!!!