1984 Pontiac Fiero

Coupe

8 - Cyl.

Automatic

1g2am37r4ep305437

Clear

Gasoline

This is an 84 Fiero that has a 4.9 cadillac v8 conversion done. The engine has been rebuilt and has 0 miles. It has been hot tanked, cylinders honed, new cam bearing, rings,main and, rod bearings, new timing chain, water pump, and all new gaskets and seals. heads were done. reman. allante gear reduction starter. new cap , rotor, high performance wires, platinum plugs. Two new oxygen sensors, reman computer. New hoses, belt, tensioner. The computer system is a ford 5.0 H O MAF EEC IV from a 1990 mustang. Runs great !!! The trans is a 4t60 from a 90 deville. new seals, two reman. drive shafts. New adjustable modulator. It has a new haden trans cooler mounted in front of the radiator. The brakes had a full grandam ventilated disc conversion. All new brake lines, new blazer master cylinder. new pads, and rotors all around. reman. calipers all around. The suspension has had new ball joints in the front. One new inner tie rod in the back. the suspension bushings have been all replaced with urethane bushings. all new shocks, and struts. new stabilizer end links. Exhaust is all new 2 1/2" pipe with a thrush welded muffler. Sounds pretty mean !!! The wheels are 15x7 chevy baretta aluminum (fair condition) tires are good. Battery is relocated to front. interior is fair condition. Dash pad is near perfect. new cd player. Custom shifter. drivers seat is excellent. passenger seat has two small tears (1") each. Head liner has been recovered. Guages have been converted to white backrounds. The paint is about 2 years old, dupont base/clear. Looks good NOT perfect, or show quality. some chips and imperfectons. I am a professional auto mechanic for 29 years,I did all the mechanical work. The car has never been on the road. It is a project about 90% done. It has had the trunk ends patched, and new upper rear rails have been completely replaced. It should be drivable as is, but does need a few thing to be legal. Rocker panels need to have a patch welded in. It needs the correct speed sensor for the seedometer to work. There are other small things that need to be finished, This is a project in progress !!!!! Car is sold ASIS. No warranty. I have probably around $4000.00 in parts in this project, I have had to close my shop, and have no place to finish or store the car. My loss your gain. Must recieve $500.00 paypal payment within 24 hours of auction end or it will be relisted. must be picked up no later than 10 days after end of auction. U.S. sales only.