1986 Pontiac Fiero

SE Coupe

6 - Cyl.

Automatic

1g2pf3795gp225944

Clear

Gasoline

1986 Pontiac Fiero SE 45k on Engine and Tranny Rebuild Engine is a 2.8 bored over to a 3.2 with titanium lifters, cams, msd ignition, etc. I do have all the receipts for this. Tranny is an Auto with a shift kit and a 2745 high stall torque convertor Stainless Steel Brake Lines Mecham Side Scoops Superchip (have original chip also) Pushbutton Start (still requires key to the on position) Rear window has 35% Silver Tint Intieror is Grey with Blue Headliner Tires in good shape Does have minor damage to the passenger side of the car from the previous owner-The fender is cracked along the wheel well lip and the door is cracked where it meets the fender, it does not hinder the performance of the door to open and close and the inside locks work, both inside and outside handles work fine. The drivers side headlight motor needs the clip to hold the connecting rod to the assembly, other then that it works fine. Extras include:Air conditioning pump, extra alternator, haynes manual If you have any questions or need specific pictures please feel free to email me. On Jun-08-10 at 10:14:50 PDT, seller added the following information: 1986 Pontiac Fiero SE 45k on Engine and Tranny Rebuild Engine is a 2.8 bored over to a 3.2 with titanium lifters, cams, msd ignition, etc. I do have all the receipts for this. Tranny is an Auto with a shift kit and a 2745 high stall torque convertor Stainless Steel Brake Lines Mecham Side Scoops Superchip (have original chip also) Pushbutton Start (still requires key to the on position) Rear window has 35% Silver Tint Intieror is Grey with Blue Headliner Does have minor damage to the passenger side of the car from the previous owner-The fender is cracked along the wheel well lip and the door is cracked where it meets the fender, it does not hinder the performance of the door to open and close and the inside locks work, both inside and outside handles work fine. The drivers side headlight motor needs the clip to hold the connecting rod to the assembly, other then that it works fine. Extras include:Air conditioning pump, extra alternator, haynes manual Tires are in good shape List of engine mods: New oxygen sensor-$22.99, Taylor Wire Set-$69.00, Engine Cradle Bushings-$27.00, High Volume Oil Pump-$90.00, Stroker Kit-$495.95, Cam & Lift Phase 2-$148.48, RA RLLR Tip 1.6-$159.95, Performance Cylinder Head Kit-$284.95, EGR Valve-$31.95, New Water Pump-$33.33, Valve cover gasket-$17.29, Stainless Steel Brake Lines-$103.80, Rear Tie Rod Package-$145.15, Valve Job-$76.50, Bore/Hone Cyl-$67.50, Install Cam bearings, pistons, and etc. labor for engine-$504.80 Thats a total of $2278.64 worth of engine work alone not including the cost of the msd ignition, superchip (retail of almost $200.00) and some other minor items. That also does not include the shift kit and high stall torque convertor plus labor on the tranny. So you will be getting a very good car. Happy bidding! If you have any questions or need specific pictures please feel free to email me.