1968 Pontiac Firebird

350HO Coupe

8 - Cyl.

Manual

223378L106740

Gasoline

I am forced to sell my 1968 Firebird 350HO this car is documented with the PHS. This is a south western car with absolutly no rust, and never hit. It is a numbers matching car I will do my best to describe it and all of the work I have done. The car is Vedoro green with black interior, I have the build sheet and the only options that where selected where the 350HO and Muncie 4 speed, and AM radio no other options where ordered it has the original drum brakes and manuel steering, this car is definitely a collector car. Last year I set out to restore the car I replaced the rear leafs with a Hotchkis kit and Gabriel shocks, I removed the front clip and powder coated the subframe, A arms, sway bar and brackets the spindles, motor mounts, inner fender wells, radiator support and all pieces. I also installed the Hotchkis front springs and Gabriel shocks. While I had the front off I replaced the heater core, and heater core housing, mater cylinder and the brake lines, the steering box was also rebuilt and new rag joint installed. The engine was rebuilt by a reputable builder here in Arizona Morrisons performance the crank was balanced and everything was done the engine is 100% rebuilt it has a comp cam and comp roller rockers everything else is stock including the numbers matching carb and distributor. I installed a new Hayes clutch, pressure plate and throw out bearing. The tranny was inspected and freshened up. I even went as far as powder coating the drive shaft and replaced the u joints. as the car went back together everything was replaced with new reproduction parts from either Ames performance or Classic industries. I have the receipts to and all the paper work that goes with the car. I can go on and on with this car I purchased it as an investment but I have to sell it, I will not be giving this car away but I am prepared to take a loss. Now the status of the car a few months ago when Money started getting tight I had to stop the project, it is 90% together and I have everything to reassemble it including a reproduction hardware kit. The car can be rolled and delivered it is just the sheet metal that needs to be reassembled. I included the current pictures of the cars state. I stand 100% behind this car if this car is sold the buyer can come out and inspect it before delivery. Please ask any questions before bidding also the buyer is responsible for all shipping charges I can assist in arranging for delivery. A $2000. deposit is due with in 48 hours of the end of auction and balance due with in 7 days. I can store the car untill pick up that is no problem. Also all bushings, ball joints and hardware where replaced with new. anything that was replaced such as hardware, springs etc. I have the take offs I threw nothing out. If you are serious and would like to speak to me abou the work that was done I can answer any question call me at 623-980-9623On May-31-10 at 09:30:42 PDT, seller added the following information: I forgot to mention the exhaust manifolds are ceramic coated inside and out, I put so much into this car I have forgotten everything that was done. When I installed the new heater core and box I also installed a new wiper motor. I also rebuilt the hurst shifter with there rebuild kit, shifts nice and tight.On May-31-10 at 09:35:01 PDT, seller added the following information: All weather striping and felts have been replaced, new rubber body mounts where installed also.On Jun-01-10 at 09:15:26 PDT, seller added the following information: The care comes with Rally 2's also included are a set of 14" steel wheels powder coated Semi gloss black with OEM PMD hubcaps. When the car was finished I planned on running the stel wheels with the PMD and red lines.On Jun-01-10 at 09:19:45 PDT, seller added the following information: All 4 corners are new drums, slaves, shoes and bearings.