1980 Porsche 911

911SC Coupe

6 - Cyl.

Manual

91A0142436

Gasoline

This is a groovy 1980 911SC that has been sitting in my garage this winter. I've owned the car for 7 years. It has been rebuilt by me for a Drivers Education fun car. However, it can be driven on the street but not recommended since it has a Safety Devices welded in full roll cage. My goal was to race the car but due to divorce it has taken a back seat. It has been on the track at least 5 times in Drivers Ed environments. It is a well handleing and quick car! The engine has been completely rebuilt using all new parts. Only having 5 DE's and some around the county driving the engine is well broken in and does not leak one drop of oil. I can provide a complete build list for the engine with all reciepts. The suspension was completely rebuilt as well. Bilstien shocks have been revalved and recharged for the track. All new hardware was used to replace old parts. Elephant racing monoball suspension as well as the front tower strut crossbar have been used. SRP antiroll bars front and back are installed. Brakes are original but have been rebuilt. Stainless braided brake lines have been used. The transmission was rebuilt by the previous owner so I have not done anything to that part. It shifts nice for a 915! I have a kirkey racing seat installed with the 5 point harness. It is a stripped down race car that can been driven on the street. I have most all the interior parts including seats etc. There are three sets of wheels with the car. One set is the original fuchs 15" and a knockoff set of Fuchs 16" (mounted with brand new Kumho Victoracers) for the track as well as a Momo set for driving around the town. I have a reciepts for most all the parts on the car. Email me for for specific questions! GT Racing front RS valence and rear RS tail are on the car. Also, the exhaust is Stainless SSI backdated with a Monte dual in dual Stainless muffler... sounds great! Torsion bars are hollow... 30mm in back and 23mm in front.