1977 Suzuki RM

Rebuilt, Rebuildable & Reconstructed

This is my 1977 Suzuki RM370B that I put back together so it could be raced, wheelied or put in your garage or office(hopefully to ride)Painted frame and swingarm and used all new bearings in steering neck and new swingarm bearings and bushings and all new rear wheel spaces and chain adjusters. Took the wheels apart and painted the hubs, new bearings installed, cleaned the rims and spokes and put new nobby tires on with a new ProTaper chain. Motor was rebuilt with all new bearings, seals, clutch and new piston/rings and new Boyeson Reeds and intake manifold. I installed a new Mikuni 36mm carb along with the Proform Exhaust, which makes the mighty 370 stand and go. New levers, cables, fuel tap, air filter and brakes were also installed. Cleaned up the rear shocks and rebuilt the front forks. Wicked and Twisted did the repaint on original Tank and front fender, new side covers and striping by RM PhilThis was a low hour RM so I used most ot the original parts, even got to keep the frame sticker. New seat cover and foam from Vintage Suzuki and I also put on a new kick starter. All other parts used are from American Suzuki Motor Corp. any question please ask, many thanks, Russell