2003 Ford F-350

Pickup Truck

5.4

Automatic

1FTSW30L93ED15017

Clear

Gasoline

A Very Low Mileage Maryland Inspected, 2003 F350 Crew Cab. 2WD, 5.4 Liter V/8, Automatic. Runs Great. Only 43,876 Original Miles. A/C, Am/Fm Radio, Cloth/Vinyl Bench Seats, New Battery, New Fuel Pump, New A/C Blower Motor. A/C Works Great. Tires Have Good Tread Left On Them As Seen In Photo's. The Clear Coat Is Fading/Flaking At Places, And The Body Has Normal Wear And Tear - A Little Ding Here Or There But Nothing Major, Nothing Rusted Thru. The Bench Seats Show Normal Wear And Tear As Well... It Is A 2003. "It Does Not Have The Tailgate", & " It Does Not Have P/W, P/L, C/C, T/W." It Passed Maryland Inspected, And It Is Sold As Is With No Warranties Or Guarantees Expressed. I Reserve The Right To End It Early Since I Have It Listed Locally. "" This Is What Is Required To Pass Maryland State Inspection ""1.OBTAIN VEHICLE IDENTIFICATION NUMBER AND ODOMETER READING 2. INSPECT STEERING FOR: (A) STEERING WHEEL CONDITION (B) STEERING COLUMN CONDITION (C) LASH (D) TRAVEL FOR JAMMING OR BINDING (E) LINKAGE FOR EXCESSIVE FREE PLAY (F) POWER STEERING CONDITION (G) VEHICLE MUST BE ROAD TESTED 3. INSPECT WHEEL ALIGNMENT FOR: (A) TOE READING (B) CASTER AND CAMBER ONLY IF ROAD TEST INDICATES (C) REAR WHEEL ALIGNMENT & AXLE 4. INSPECT SUSPENSION FOR: (A) BALL JOINT WEAR (B) KING PIN OR SPINDLE BOLT CONDITION (C) WHEEL BEARING CONDITION (D) SPRINGS AND TORSION BAR CONDITION (E) SHOCK ABSORBER OR STRUT CONDITION 5. INSPECT BRAKE SYSTEMS FOR: (A) STOPPING DISTANCE, EITHER ROAD TEST OR DECELEROMETER (B) HYDRAULIC SYSTEM CONDITION(C) DRUM AND DISC CONDITION (D) LINING AND PAD CONDITION 2/32 INCH GENERAL MINIMUM (E) GENERAL CONDITION OF MECHANICAL LINKAGE (F) VACUUM OR HYDRAULIC BOOSTER SYSTEM CONDITION (G) PARKING BRAKE FUNCTION 6. INSPECT TIRES AND WHEELS FOR: (A) CONDITION OF TIRES, SIZE, TYPE AND TREAD DEPTH (B) CONDITION OF WHEELS, NUTS, STUDS, OR LUGS 7. INSPECT FUEL SYSTEM FOR: (A) FUEL TANK CONDITION AND LEAKS (B) CHOKE, HAND THROTTLE AND ACCELERATOR OPERATION 8. INSPECT EXHAUST SYSTEM FOR: (A) CONDITION OF MANIFOLD, ALL PIPING, MUFFLER, RESONATOR AND THE TAIL PIPING. TO INCLUDE LEAKS AND PROPER MOUNTING 9. INSPECT BUMPERS FOR: (A) CONDITION OF BUMPERS INCLUDING HEIGHT AND PROPER MOUNTING 10. INSPECT FENDERS FOR: (A) CONDITION OF FENDERS TO INCLUDE MOUNTING AND COVERAGE OF WHEELS AND TIRES 11. INSPECT LIGHTING FOR: (A) CONDITION AND FUNCTION OF OF ALL ORIGINAL EQUIPMENT LIGHTING AND WHATEVER ADDED LIGHTS ARE AUTHORIZED. (B) INSPECT HEAD LIGHTS FOR CONDITION, CANDLE POWER OUTPUT AND AIM (C) INSPECT AUXILIARY OR FOG LIGHTS FOR AIM AND PROPER MOUNTING 12. INSPECT MIRRORS FOR: (A) CONDITION OF MIRRORS TO INCLUDE UNOBSTRUCTED VIEW OF BOTH INSIDE AND OUTSIDE MIRRORS WHEN REQUIRED 13. INSPECT VEHICLE GLAZING FOR: (A) PROPER MATERIALS USED FOR SPECIFIC LOCATIONS (B) OPERATION OF DRIVER WINDOW (C) DAMAGE THAT EXCEEDS ALLOWABLE LIMITS (D) TINTING NOT INCORPORATED INTO THE GLAZING EXCEPT AS NOTED IN THE PROCEDURES. 14. INSPECT WINDSHIELD WIPERS FOR: (A) SATISFACTORY OPERATION AND CONDITION OF ARMS AND BLADES 15. INSPECT HOOD/CATCHES FOR: (A) CONDITION AND PROPER FUNCTION OF HOOD FOR FULL CLOSURE 16. INSPECT DOORS, HANDLES AND LATCHES FOR: (A) CONDITION AND PROPER FUNCTION OF ALL DOORS, LATCHES HINGES AND HANDLES 17. INSPECT FLOOR AND TRUNK FOR: (A) HOLES OR RUSTED OUT AND WEAKENED CONDITIONS IN FLOOR OR TRUNK PAN 18. INSPECT SPEEDOMETER AND ODOMETER FOR: (A) OPERATION AND LEGIBILITY (B) REGISTER IN MPH OR KILOMETERS 19. INSPECT ELECTRICAL SYSTEM FOR: (A) PROPER CONDITION AND FUNCTION OF HORN (B) CONDITION OF WIRING AND SWITCHES (C) NEUTRAL SAFETY SWITCH IN AUTOMATIC TRANSMISSIONS ONLY (D) CONDITION OF BATTERY CABLES AND HOLD DOWN 20. INSPECT DRIVERS SEAT FOR: (A) PRESENCE, CONDITION AND MOUNTING 21. INSPECT SAFETY BELTS FOR: (A) PRESENCE, CONDITION AND OPERATION AND MOUNTING 22. INSPECT MOTOR MOUNTS: (A) IF ORIGINALLY MANUFACTURED WITH; CHECK PRESENCE AND CONDITION 23. INSPECT GEAR SELECTION INDICATOR FOR: (A) PROPER INDICATION OF CORRECT POSITION 24. INSPECT UNIVERSAL JOINTS / CONSTANT VELOCITY JOINTS FOR: (A) ATTACHMENT AND WORN, DAMAGED, OR LOOSE JOINTS (B) TORN OF DAMAGED CV BOOTS 25. INSPECT EMISSIONS EQUIPMENT FOR PRESENCE AND PROPER CONNECTION: (A) CATALYTIC CONVERTER(B) POSITIVE CRANKCASE VENTILATION (C) AIR INJECTION SYSTEM (D) EXHAUST GAS RECIRCULATION SYSTEM (E) EVAPORATIVE EMISSIONS SYSTEM