1966 Chevrolet C-10

Custom Pickup Truck

350 V8

Automatic

1001ZF12693A

Clear

Gasoline

This is a 1966 GMC that is ready for cruise night. This truck is a blast to drive and almost everything mechanically has been replaced with new or rebuilt. Drive train came out of 1979 corvette. It is a 350 small block bored .30 over with a mild cam. The motor has less than 1000 since complete rebuild. Motor is backed by 350 turbo transmission with new steels and frictions and shift kit. It is a floor shift with hurst shifter. All accessory parts on motor are new including alt, battery, fuel pump, oil pump, starter, hoses, gaskets. In addition the brakes are all brand new including master cylinder and all lines! The front suspension is only a few years old. It includes new steering box, tie rod ends, ball joints. It drives, stops and steers great. The truck has a mild cam and an awesome loop at idle. Newer Hooker headers that exit at the side Daytona style. Body is in really good shape. Very little rust issues. Bed of truck is rust free with original wood. Cab corners, cab, cab mounts all in good shape. Floor boards are very solid with the exception of approximately 3 inches between rocker panel. They have been repair with 22 gauge steel. (Patched). Both front fenders at the bottom both have rust. They have also been repaired (patched). I am available to answer any questions. I have owned a lot of C10's and GMC from this era and this is by far the best example I have owned. I am confident that you could fly in from the coast and drive it home. I drive it on the interstate frequently and it glides down the road at 80 mph with no issues what so ever. Of course that is expected with all that has been done to this truck. Come drive it and you will buy it. Check out the video! http://youtu.be/HbSZauc9oYYOn May-16-14 at 15:34:06 PDT, seller added the following information: Please note I am not receiving messages via ebay email or they are very delayed in getting to me. For that reason if you have questions please feel free to text or call me at 785-317-6708 or likely I will never receive the message until the problem is corrected. Thanks! Also, to answer a few of the questions that I have received. I may be interested in partial trades, other hot rods, motorcylces, boats, etc. Please no major projects. This truck is solid but I will list all the minor issues that there are. The windshield is cracked but its out of the field of view, the pinion seal is leaking a bit enough to leave a small spot on the driveway. All the gauges work including the added on oil pressure, water temp and voltage however the gas gauge occasionally works and the speed does not as it was not hooked up to the turbo 350. Other then those minor issues it drives great! Thanks for all the interest and sorry for the delay in answering questions!