1994 Ford Mustang

Coupe

New Ford Racing Boss 302

Standard

1FALP42D3RF181174

Clear

E85

I have a 94 Cobra...it's in like new condition...I'll try to list all the the things on the car, I'm sure I'll miss some...I've owned the car for 10 years and have driven it very little, it's been kept inside and never been smoked in..or driven in the rain...I'll start with the motor first...it's a ford racing boss 302, probe forged pistons, eagle 4340 3.100 stroke crank, eagle 4340 h-beam rods, 321cubic inches,alumnium fidanza flywheel, lakewood bell housing, spec stage 3 clutch, it has arp 1/2 inch cylinder studs,cometic gaskets and arp bolts throughout. Comp cams Nx282hr-14 cam, roller chain, Canton 7 Qt.oil pan, custom oil pump, and pickup. trick flow R upper and lower..ported..RHS 215cc heads with comp cams springs, locks, valves, Crane Gold 7/16 1.6 roller rockers, Comp .080 hardened pushrods, 75mm throttle body... Polished Vortech YSI with custom pulleys for the crank ASP (8.5in.) and the water pump..2.95 upper..custom water pump pulley, custom made discharge tube, MSD 6A, Fast engine management system with lap top and several tunes...ford racing alumnium drive shaft with loop, 31 spline strange axles, posi..Tremec TKO 600 5 speed..nitto 305 drag radials, 10 inch deep dish chrome 18 inch cobra R wheels on back and 9 inch on front...tires have approx 1500 miles on em...UPR chromemoly K member with UPR upper and lower control arms on the rear, sub frame connector's...corbeau seats, pro 5.0 shifter, rear seat delete kit (I have the factory seats) 7 inch flip screen dvd jensen in dash....It's running on E85 so it has ford racing 160lb injectors and a magnaflow EFI 750 fuel pump, sumped tank, dual 100 micron filters, 10an line to pump, 8an lines to vorteh fuel rails, 8an to aeromotive regulator and a 6an return line to tank all steel braided lines....car has power windows, locks, tilt, cruise, alarm system, keyless entry. I prob have 1500 miles on the motor, 2500 on the rest of the drivetrain, it's basically like driving a new car...cold A/C too!! I have all the reciepts for the car in a 4 inch thick binder. Call Scott: 405-602-4255 * Car made 700 to the tires @ 6200 rpm..and that's only at 15lbs of boost...(that's well over 800 at the crank) should make an easy 750+to the tires if you want to rev it...or turn up the boost and it is capable of over 900 to the tires....the motor and running gear will handle it...easy! Might consider partial trade