Detail Info for: 1966 Ford Mustang 1966 mustang convertible

Transaction Info
Sold On:
06/23/2018
Price:
$ 8500.00
Condition:
Mileage:
100000
Location:
Farmingdale, New York, 11735
Seller Type:
Vehicle Specification
Year Make Model:
1966 Ford Mustang
Submodel Body Type:
Engine:
Transmission:
Automatic
VIN:
6T08C158864
Vehicle Title:
Clear
Drive Train:
Fuel Type:
Gasoline
Standard Equipment:
Optional Equipment:
Vehicle Detail
1966 MUSTANG CONVERTIBLE, EMBERGLOW, RALLY PAC.5.0 EFI CONVERSION WITH AOD TRANSMISSION DON'T KNOW THE MILEAGE OF ENGINE. TRANSMISSION HAS BEEN REBUILT "0" MILES. NEW FRONT DISC BRAKES, NEW REAR BRAKES AND DRUMS, NEW FRONT SUSPENSION, 1" LOWERING 620 lbs RATED FRONT SPRINGS,REAR SPRINGS ARE 5 LEAF MID EYE. NEW GAS TANK, FUEL PUMP AND EXHAUST SYSTEM.3 ROW ALUMINUM RADIATOR.NEW SHEET METAL, FENDERS, HOOD, DOORS, QUARTERS AND COMPLETE FLOORS/TORQUE BOXES. 17" WHEELS/TIRES, TIRES ARE 225 45 17. INCLUDED, ALL GLASS. COMPLETE NEW PONY INTERIOR, FRONT BENCH SEAT ALREADY COVERED, REAR UPHOLSTERY CARPET, TOP/PLASTIC WINDOW. NEW FRONT AND REAR BUMPERS. THE FRONT SUSPENSION HAS STOCK UPPER AND LOWER CONTROL ARMS, THERE IS A 1" HEAVY DUTY FRONT SWAY BAR WITH URETHANE BUSHINGS, THE STRUT ROD BUSHINGS ARE ALSO URETHAN, AS WELL THE TIE RODS AND DRAG LINK ARE NEW. THE STEERING IS NEWLY REBUILT 5 TURN STOP TO STOP MANUAL BOX. AS WELL AS THE TIE RODS AND DRAG LINK CAR HAS BEEN SITTING AND NOT DRIVEN FOR FOR THREE YEARS. CAR RUNS AND SHIFTS GREAT! ASK ANY AND ALL QUESTIONS I MAY HAVE FORGOTTEN TO LIST SOMETHING SO ASK IF YOU DON'T SEE IT. THANKS FOR YOUR INTEREST AND GOOD LUCK BIDDING. BIN $10,000. SHIPPING IS NOT INCLUDED THAT IS UP TO THE WINNING BIDDER. I WILL ASSIST WITH LOADING IF NEEDED. NO WARRANTY IMPLIED AS IS. NON-REFUNDABLE DEPOSIT. FOR SOME REASON WHEN I RESPOND TO MESSAGES THEY GET KICKED BACK. SO TO ANSWER ALL THE QUESTIONS SEE BELOW. The suspension is done it needs an alignment, brakes upgraded to disc in front. driver side door and fender need to be adjusted and gaps finished on the right side.I have installed rear bumper since picture for transportation. What is to align door gap, hood and a little filler to smooth out the rough edges, prime, seal, sand and paint. Install what parts are accessories The headlights are not installed, the window regulators hood and trunk locks its the small parts that once the body is done you would have to put on anyway. The wires you see coming from under the dash are the extra wires from the ECM that were not needed to make the car run, they were cut short I have tucked them under the dash. The ECM is mounted under the dash between the heater box and the w/wiper motor. New heater core. tach and clock will work just never had time to hook up. clock contacts may need to be cleaned. Rear tail lights need to be fitted better. There are no weather strips or window felts. All the window glass is there but not installed. Transmission has zero miles on it. There is an inertia switch mounted in the trunk to cut off the fuel pump should it be hit. The O2 sensors are installed in the "H" pipe. The donor car was a 1993 Cougar XR7 all the wiring, ECM and relays, shift,throttle, transmission kick down cables and gas pedal were used from the Cougar and fitted to operate in the mustang. Included is the Original factory Cougar Shop manual for the electrical systems and 1966 Mustang wiring diagrams. I hope this answered your questions. Thanks for your interest.