2000 Honda Prelude

Base Coupe

2.2L H22A DOHC VTEC Engine ODB 1 Dyno 180WHP

Manual

JHMBB614XYC001396

Clear

Gasoline

This car has a working H22A DOHC 2.2L V-TECH engine and 5 speed transmission with a Stage 3 clutch and fly wheel. The engine and the transmission have roughly 45,000 miles and everything runs very well. Additional items added/replaced on the car:DC Headers, Ceramic CoatedMegan Exhaust (no catalytic converter)290cc high impedance injectorsOriginal engine wiring was used with the engine swapECU was replaced with the Dyno performed by ZeroLift and car was converted from ODB2 to ODB1 and makes 180 WHPWeapon - R Cold Air IntakeEverything else on the engine is stock with the exception of new oil pump, water pump, belts, coil pack, spark plug wires and NGK spark plugs. The car does have power steering, and a charged AC unit that works as well as heat. I also have side skirts, original engine block, 3 original blade wheels and more parts. The cars interior is clean, no rips and in good condition. The original suspension was replaced with DC Adjustable Coilovers and is amazing on curvy roads, handles very well. The original wheels were replaced with RSX wheels and spacers on the front to clear the brake calipers, sits on 205/50/16. What The Car Needs...1. Oil leak, crankshaft timing seal needs to be replaced.2. Car was recently garage painted with stage-1 paint and looks decent, but would look better if a clear coat was applied.3. Original weather strip and door panels need replacement clips and re-attached. They are currently on, but new clips are needed. It wouldn't be a bad idea to replace the door weather strip, but not necessary.