1972 Dodge Challenger

'72 Rally Coupe

8 - Cyl.

Manual

js23g2b291730

Gasoline

E body lovers here is the project you have to check out!! This is a incredibly solid project I bought many years ago and hate to part with but have way to many projects lined up, and have come to the reality I'm not going to get everything done in this life. This is a southwest body/frame that obviously never saw Midwest rust belt weather. Check out the frame, floor pans and trunk. I bought it the way you see it in the current primer and have always stored it in heated storage through the years. The guy I purchased it from had brought it to this stage. Needs finial block sanding and your color choice. He was planning on large displacement power to replace the original 318. This car was actual rare as it was a 318 rally 3 spd manual transmission. He had the frame rails tied and a competition engineering roll bar system welded in to handle the torque. This was all done by a frame shop leveled on there equipment while welding. This would be easy to remove if you desired. This car is extremely stiff in its current state. At this time he also upgraded the rear springs and used poly in the front suspension. Also has a new set of torsion bars wrapped up that would need to be installed. I don't know there rate but research should reveal performance specs. This project comes with new in the box front and rear sway bars. After dialing in the alignment this car will perform. This car comes with parts and more parts! Its basically two Challengers worth of parts. Check out the Pics. Has two front grille sections, one has left side piece missing but good center section trim light bezels ect. Comes with 2 complete sets of glass, tinted, for doors, 1/4 windows and rear glass. No windshield. Has 2 dash cores. 1 AC/ heat control one non AC. One nice rally instrument cluster. I think there is a standard cluster as well. Two heater boxes, one AC, one non AC. Two sets of wiring, one AC, one non AC. Two complete steering columns with wheels and horn buttons. One for power, one for manual steer. Two complete rear seats and three front bucket seats with tracks, previous guy lost the other bucket when he had it at the frame shop to mock up the roll bar. Two sets of seat belts. Three front door panels and one complete set of rear panels. Comes with complete new set of legendary and paddock rubber seals window fuzzy ect. Two complete sets of tail lights plus one extra. Has nice set of Challenger front fender trim that go on the sides of the fenders,the grates, were the holes are in the pictures. Extra front and rear valance panels in good shape. extra set of hood hinges. Two sets of mirrors, one body color, one chrome. the chrome set has one with crack in the mirror which can be fixed. Two front bumpers and one rear, will need straightening and re-plate. Multiple sets of trim interior and exterior that you would need to pick over. Has a nice original TA rear deck lid spoiler Two drive shafts....... The list goes on and on. There are boxes I have not opened since purchase. This Auction Does Not Include a Motor or Trans. I have numerous options of small or big block mopar engines and transmissions available to purchase separately at additional cost. I have the facilities to restore this car at your expense. Both mechanical and body if you have the money and purchase car. I have in the past provided vehicle transport and have been able to save people a little money depending on location. Ask.