Detail Info for: Pontiac : Firebird coupe 1967 pontiac firebird project pro touring autocross build

Transaction Info
Sold On:
07/29/2015
Price:
$ 3050.00
Condition:
Mileage:
Location:
Burlington, Massachusetts, 01803
Seller Type:
Vehicle Specification
Year Make Model:
1967 Pontiac Firebird
Submodel Body Type:
Engine:
N/A
Transmission:
VIN:
223377U617160
Vehicle Title:
Clear
Drive Train:
Fuel Type:
Standard Equipment:
Optional Equipment:
Vehicle Detail
Please read full description and ask any questions before bidding. 1967 Pontiac Firebird project car, what's been done so far : complete one piece floor pan, new trunk lid, complete one piece trunk floor, both trunk drop offs, tail panel, tail panel filler, both inner and outer rockers including inner braces, both lower a-pillar inner and outer pieces, both lower b-pillar inner panels, both outer rear fender wells (fender lips have been rolled for more clearance), Detroit Speed mini tubs (just mocked in place), trunk gutters, rear window to trunk filler, complete one piece firewall, one piece upper cowl, both outer cowl assemblies, left and right door shells, both quarter panels (Camaro quarters) and new passenger side door hinges. Both original rear sub-rails are just screwed in place so that the floors could be located, the plan was to run a four link and 9 inch, if you want to go stock you will need to un-screw the rails and slide new ones in. The roof needs repair work along windshield and rear glass, there is some repair work that needs to be done on the c-pillar area on the passenger side, the drivers side a-pillar needs minor filling or patching, rear window opening at top of quarter panels need some minor work and the top dash panel needs to been repaired or replaced. Included with the car is an original hood, cowl panel behind hood, front bumper, front lower fender corners (NOS GM, but for Camaro), glass and all door guts for drivers side, both quarter glass and regulators, one seat support, both taillight assemblies, gas tank fill tube, gage cluster, glove box door, rear bumper (Camaro), header panel with brace and hood latch, ash tray, two sets of hood hinges, e-brake pedal assembly, both outer door handles, lower front valance (Camaro), floor drain fillers, drivers outside mirror, trunk latch, and one front inner fender brace. Keep in mind most of these parts are used and might need some work. All work was done professionally, what you are bidding on is basically a body from the firewall to the tail panel with some misc. parts (listed above). I URGE YOU TO ASK QUESTIONS, I WANT YOU TO BE 100% CONFIDENT IN WHAT YOU ARE BIDDING ON. THERE IS NO INTERIOR, NO DRIVETRAIN, NO SUBFRAME OR SUSPENSION, THE CHASSIS TABLE IT SITS ON IS NOT INCLUDED. THE WINNING BIDDER IS 100% RESPONSIBLE FOR PICK UP, I WILL NOT SHIP. A $500 DEPOSIT IS DUE UPON END OF AUCTION AND BALANCE MUST BE PAID IN CASH WHEN THE CAR IS PICKED UP. THE CAR MUST BE PICKED UP WITH-IN 14 DAYS OF END OF AUCTION. IF YOU WOULD LIKE TO TALK OVER THE PHONE, PLEASE SEND ME YOUR NUMBER, THANKS AND GOOD LUCK.