1965 Chevrolet C-10

c-10 Fleetside red white Kevlar

383 stroker jeggs blue point motor

auto 400 turbo with overdrive

K1545Z147461

Clear

Gasoline

1.) KEVLAR SPRAYED OUTSIDE AND LINE-X ON BEDSIDE, INSIDE AND CAB INSIDE AND OUTSIDE. HOOD FRONT FENDERS ALL BED PANELS 2.) A/C IS MADE BY COLD AIR PRODUCERS IN FT WORTH, TX 3.) TURBO 400 TRANNY NEWLY REBUILT BY SULLIVAN, DALLAS, TX 4.) ITS SET UP TO ONLY HAVE POWER AND ON TOP END. 5.) IF YOU CHANGE GEARS FRONT AND REAR AND PUT 455-456 GEARS THIS TRUCK WOULD BE A HANDFUL BUT CURRENTLY GEARS MAKE IT MORE GAS FRIENDLY. 6.) A/C - MARCH PULLEYS - MSD - EDDLE BROCK CARB 7.) CUSTOM MADE FOX SHOCKS FRONT & REAR 8.) SPRINGS ARE CUSTOM MADE 9.) MICKEY T TIRES 37" AND RIMS 10.) INTERIOR BLACK LEATHER WITH OSTRICH SIMULATED PATTERN THATS RED IN MIDDLE OSTRICH PRINT BLACK ON OUTSIDE OF SEAT CENTER LAY DOWN CONSOLE 11.) NEW GAUGES - WIRING HARNESS STEERING COLUMN - PSC GEARBOX - HYDRAULIC STEERING 12.) SWAY BAR FRONT & REAR 13.) FRAME OFF RESTORATION 14.) CAB WAS PECAN BLASTED AND ALL METAL THAT WAS RUSTED WAS CUT OUT AND REPLACED. RUST WAS COMPLETELY REMOVED. 15.) I CAN SEND MORE PICS VIA TEXT OR EMAIL FROM MY IPHONE. 16.) NEW FRONT & REAR AXLES AND GEARS. FRONT DISC - CCP 17.) ALL CABLES, FUEL LINES, FUEL TANK ARE NEW. 18.) 205 - NP TRANSFER CASE NEWLY REBUILT 19.) LATCHES INSIDE DOORS ARE BRAND NEW 20.) ALL GLASS, WEATHERSTRIPPING, ANY RUBBER IS BRAND NEW. 21.) NEW DOORS AND HINGES. NEW SOUND & HEAT SHIELD SPRAYED. 22.) NEW HOOD AND EXTRA BRACES ADDED TO CENTER SO THE HOOD DOES NOT FLEX IN THE CENTER WHICH YOU WOULD NORMALLY SEE IN FLAT HOODS. IT IS SPRAYED UNDERNEATH BY LINE-X IN FORT WORTH, TX 23.) BOTH INNER AND OUTER FENDERS ARE NEW. THEY ARE BOTH SPRAYED WITH LINE-X INSIDE AND OUTSIDE. KEVLAR SPRAYED ON THE OUTSIDE. 24.) CAB CORNERS NEXT TO THE WINDSHIELD ARE NEW AND SPRAYED. 25.) BED WAS DISASSEMBLED. OUTER FLEETSIDES AND BED INSIDE PANELS WE SPRAYED WITH LINE-X AND KEVLAR. 26.) FRONT OF BED PANEL IS BRAND NEW AND SPRAYED WITH LINE-X AND KEVLAR. 27.) FLOOR BRACES ARE ALL NEW AND SPRAYED. 28.) CAB SPRAYED INSIDE. FIREWALL AND BOTTOM OF TRUCK WAS SPRAYED. 29.) ROCKER PANELS AND CAB CORNERS WERE CUTE OUT OF CAB AND REPLACED. 30.) STAINLESS STEEL BOLTS WERE USED TO ASSEMBLE EVERYTHING 31.) I DIDN'T DO THE STEERING COLUMN. 32.) NEW DASH CLUSTER 33.) OVERDRIVE SYSTEM WAS DONE BY THE OVERDRIVE COMPANY. 34.) MOTOR 383 STROKER WITH ALUMINUM HEADS, ROLLER ROCKERS, WITH A 435 HP JEGGS BLUE POINT WHICH IS UNDER WARRANTY. 35.) STEERING BOX IS MADE BY PSC IN FORT WORTH, TX 36.) HYDRAULIC STEERING MAKES IT EASY TO TURN 37" TIRES AND KEEPS IT STRAIGHT AT 70 MPH. FUN TO DRIVE.