1975 Pontiac Firebird

400 (6.6L)

Clear

This is the frame and drive train of a 75 Trans Am with the body shell of a 75 Firebird. The Firebird was out of Arizona so the body shell is clean with no rust on the floor or trunk pans. The 400 engine and TH400 transmission out of the Trans Am were both rebuilt. I have done a frame-off rebuild of everything mechanical(see details below for what exactly was replaced and/or rebuilt), but the car has a bare interior and still needs proper panel alignment/door hanging, paint prep, spoiler installation and paint. There is also some light surface rust in a few areas(roof, passenger-side quarter panel) from moisture between the cover and body. I installed a fiberglass cowl hood scoop on the firebird hood, but it has a few small cracks in the filler where I blended the scoop with the hood(see pics). I also have the rear seats and all of the interior panels, but the car is missing a center console, dashboard, and front seats. The car still needs to be wired up as well. All of the old wiring harnesses from both the Firebird and Trans Am will be included or you can pick through them and take what you need. Engine:0 Miles on rebuilt 400 (6.6L) with 6X Heads - I've fired it up but haven't broken it in yet.Comp Extreme Energy CamEdelbrock Performer RPM intake manifoldHolley 650 CFM 4-barrel Carb.Hooker headersNew HEI Distributor along with new plugs and 8mm wiresNew fuel pumpAll new accessoriesChrome oil pan, valve covers, and air cleanerTransmission:Rebuilt TH4002200 RPM Torque ConverterChrome panSuspension:New leaf springsNew shocks front and rearPolyeurethane bushings kit from Energy Suspension (red)New ball jointsSteering:New gear boxNew links and tie rod endsNew wheel bearingsBrakes:Rear disk conversion kit from Stainless BrakesNew front disks and calipersNew braided steel brake linesMISC:New radiator and fan shroudNew fuel linesNew Items Not Yet Installed:Aftermarket wheel well spoilers and front valence spoiler from Classic IndustriesAftermarket fiberglass lower front valence panelDoor panels (black) from Classic IndustriesDoor sill plates from Classic Industries3.83 Richmond gear set for GM 8.5" 10-boltTrunk Pan for 70-81 Firebird or Camaro from Classic Industries (The car doesn't actually need this. I bought it before I found the cleaner firebird body shell)You would also be welcome to pick through all of the old parts and take what you would need...mostly wiring harnesses, under-dash components, rear bench seat and other random parts. Feel free to contact me with any questions.