1988 Jeep Cherokee

laredo Sport Utility

4.0

Manual

1JCML7848JT253235

Clear

GAS

Hi, Up for sale is my 1988 Cherokee. I originally bought the jeep 3 years ago and built it up in California, I moved Illinois and had it shipped back. It spent its entire life, up until this past winter in California, so it has no rust. I have kept all the receipts for this build along with the parts instruction manuals. The odometer says 225,000, but that is only on the body, everything else has been replaced. Here's a list of all that is on it... You can buy it now at $7500, the reserve is set at $6000. "racing red" paint job done by Miracle auto body rustys 6.5 inch long arm kit skyjacker shocks teraflex revolver shackles in the rear extended brake lines front and rear Dana 44 rear with axle truss, 4.56 gears and a detroit limited slip locker Front High Pinion dana 30 out of a 97 cherokee, has stronger axle shafts, with axle truss, 4.56 gears with a lock rite "no slip" locker rustys steering brace Extended bump stops in the front rustys frame stiffener upgraded to an open style radiator system 3 core radiator two electric radiator fans, new style from 97 and newer cherokees, wired to two separate switches brake booster from a V8 Grand cherokee custom front bumper with tow hooks, smittybuilt 9000 winch, and fog lights. The winch also has the rubber isolator for the cable and hook custom rear bumper and tire carrier with jerry can mounts and two jerry cans roof rack rock sliders metal gas tank skid plate metal front steering skid plate ax15 manual trans, I bought it new 3 years ago to replace the stock peugot trans. np231 transfer case with slip yoke eliminator Tom woods custom rear drive shaft the engine has been fully built, bored 30 over with a high performance comp cam, spectra air filter sylvania ultra head lights 4 inch fender flares that are collapsible 5 33X12.5R15 Super swamper trXus STS Tires mounted on 5 cragar D wheels, spare has never been used rugged ridge HD steering interior Rockhard roll cage JKS quick disconnects for the front sway bar hood scoops New cat upgraded exhaust manifold and intermediate pipe flowmaster muffler Stereo by Pyle, four speakers, head unit and 1000 watt amp The jeep has been wheeled and is unstoppable, it has some rock rash on the wheels and on the body, but the paint is still glossy and looks great. There are two things that need a little bit of work. There is some interference coming through the speakers, I've been told it just needs a better ground. It also needs an alignment. It drives straight and tracks fine, but the steering wheel is cocked at a strange angle. If you have any other questions or want more pictures, let me know. Thanks for looking. Maybe I should have posted this better, the body, mainly just the odometer has 225000 miles on it. The axles, transmission, transfer case, engine, lift, and basically everything else has about 10,000 miles on them. The axles were fully rebuilt at a shop in california called the rear end shop, new seals, new bearings, new gears and new lockers. The transmission was bought new along with the bellhousing, slave cylinder and throwout bearing. Transfer case is out of a 2006 jeep liberty and was rebuilt when the slip-yoke eliminator was installed. Tom woods driveshaft was purchased new when i bought the lift. The engine has been completely torn down, and rebuilt at tech machine in Livermore, ca. It has been bored 30 over and is running a comp cams xtreme 4x4 camshaft for big torque. if you have any other legit questions, ask away. Thanks.