1966 Chevrolet Chevelle

350

136176a173005

Clear

1966 Chevelle. Body is off as part of a total restoration. I have been working quite a bit on the motor and chasis. Motor is rebuilt 350 with rebuilt 327 heads and a 327 350HP cam shaft. New top end with new Holley Street Avenger carb. Mallory distributor with MSD plug wires. New exhaust system with Flowmaster ceramic heads and Dougs electric cut outs, to run open headers, OR run through the new Thrush exhaust system. Powerglide automatic trans mission that was rebuilt with 10 bolt rear ( not sure of the gears). Also included but not pictured is a NEW raditor support and NEW aluminum 3 row radiator(over $500).. Rear tries are 275 G Force street slicks. Rear 8x15 Rallys. front 7x15 Ralleys. I have put a wiring harness and Painless 7 circut fuse box on temporaily , just for running while working on it. Key is mounted to the frame temporaily too. Clean title for the body and front clip. Body will need new floors and rear qtrrs. Front fenders have some rust but can be patched. Rear window and 3 of 4 other the other glass windows are included. No windshield. Does include a steering column. No interior included. Buyer responsible for pick up. The body can be set on the frame for transporting if necessary. $500 depsoit due immediately. Balance within 7 days. Must be picked up within 45 days. On Nov-24-12 at 14:03:24 PST, seller added the following information: http://www.youtube.com/watch?v=IcDrS5qfStc&feature=plcp Today I shot this video so you can hear the engine running. You will hear both open headers and then closing the Doug's cout outs and running through the Thrust mufflers. Sounds awesome both ways! I have received several messages about setting the body on the frame for transporting. Yes I can set the body on the frame for transporting purposes. I will be temporary but secure. I will need a couple days after you purchase to get this done, so give me a little lead time if you would like this done before you pick it up.On Nov-29-12 at 18:03:44 PST, seller added the following information: installed the raditor support and new aluminum radiator this evening (11/29/12) and posted pics