1963 Triumph Trophy

du1198

Clear

This is a 1963 triumph 650 hardtail bobber with a 1967 tr6c single carb motor. The motor has a new top end including 60 over pistons and bronze valve guides with around 50 miles on it and runs very well. The chaincase is damaged from a broken chain in the past but it is only cosmetic. It does mark it's spot with oil but I have not had a triumph yet that didn't! The exhaust spigots in the head are aluminum welded into the head. New 1 1/2" exhaust pipes that sound great. It has a new boyer electronic ignition with a dual tower harley type coil also it has a new tympanium electronic voltage regulator. New wiring through out the bike with new plug wires and handle bar mounted hi & lo beam and horn switch.New grips,throttle housing, clutch lever& new cables. New duro vintage style tires mounted on a 19" front spool hub and a stock 18" triumph wheel that are both powdercoated black. New sealed bearings in the front wheel and used fiberglass front fender, the rear bearings were cleaned and repacked with waterproof grease. I found the old school headlight here on ebay it is an old chrome 5 3/4" KD with a new sealed beam and the tailight is a new beehive with the license plate mounting bracket on the fender. The whole bike has been powdercoated black and the king sporty gas tank,rear fender,electrical box and the chainguard have blue and green prism in the powdercoat that gives off the colors in the sun.The gas tank has 3 coats of clear coat on it and the rigid seat has been recovered, it has a new sealed battery in the oil tank and the electrics are all housed in the electrical box mounted below the oil tank for a clean look. The ignition switch is mounted on the right side of the bike. I replaced the foot peg,shifter, kicker rubber and fork gaiters also. There is also an old school twisted high way bar mounted on the bike and a tool bag. If you have any questions about the bike please ask them before the auction ends not after. Thanks and good luck bidding.