1963 Dodge Power Wagon

Wagon

8 - Cyl.

Manual

2181239332

Clear

Gasoline

w100 power wagon town wagon in running condition. dana 60 rear w/ 4:11, dana 44 hd front w/4:11 and the desireable warn hubs with very good selector knobs(need o rings). new monroe shocks at all corners. new large style u-joints at prop and rear driveshaft, stock at front driveshaft. np201 transfer case and np435 transmission, both o k , no chipped teeth but could use a freshening up. new flywheel and clutch assy(ballanced), throw out bearing and bushing. hydraulic clutch linkage master and slave rebuilt. 318 polysphere motor in good shape w/ pro rebuilt carb w/ k&n filter. pro rebuilt alternator w/ new belt. radiator in great shape w/ new hoses. fairly new battery. running, turn, brake and emergency lights all work properly. horn works and horn button is in superb shape - go figure! steering wheel is original w/ some cracks at usual places, turn actuator is a signalstat. speedo, and all gauges inop. all knobs on dash there, but their operation need work except vent, it works. seat is original with the passenger seat folding foreward. have a spare front seat that with a few modifications could be used as a middle seat. both need reupholstering. have rare to find rear seat that has original upholstery that is in very good shape. glass is good save for drivers door that sports a bullit hole. has original sliding side windows in fair shape with a spare set of sliders in very good shape. have original gas tank that needs installation - have original support straps for pattern for new ones to be fabricated. tires good. body in fair shape with love needed at both door lower corners and adjacent body corners, rear fenders, rear door bottoms and front floor pans. seam between roof and window area both sides very good - a problem on most but not here. also i have a spare '66 chassis with the dana 60 rear and dana44 front w/ selectro hubs. np201 transfer case but no driveshafts. steering box, pitman arm and all linkage. 318 polysphere motor(owner said it runs but cannot confirm), no carb. bell housing and flywheel(poor shape). also have in excellent shape a 4 bbl manifold for the polysphere!(cast iron dodge). this truck has all the parts and then some to make a really nice w100. i am selling all as a package and will not seperate. any questions call jay 310 409 9829.