1989 Ford Bronco II

XLT SUV

6 Cylinder 2.9 Liter

Manual

1FMCU14T8KUB15853

4 Wheel Drive

Gasoline

ABS

Clean body and clutch work. Engine needs valve guides and tune-up. Vehicle sitting for approximately 7 years but motor still turns over. Ran 11/2009 to inspect... valve guide work is the only problem noted. Non-op (no back charges). Clean papers with us as 2nd owner. Air conditioning works great, tranny good and clean interior. Buyer is responsible for pick up/delivery. Cash ok. We don't have time to do the work on the engine is the reason we are selling. Question: How advanced is the state of disassembly of the engine? And are the transfer case, axles, and front hubs in proper working order? Answer: If you look at the 9th and 12th pic down on the list you can see the parts removed. Those are sitting in the rear most part of the vehicle on a blanket. If you look at pic 15 and 16 you will see the engine in the condition it is currently in. The valve covers have not been removed. However, the radiator, spark plugs wires(duct tape with numbers), distributor cap (cap only) and the upper manifold have been removed. The transfer case, axles and front hubs are complete. We went through the transfer gears but never locked in the hubs.