1928 Ford Model A

Pickup truck

8 - Cyl.

Automatic

Gasoline

1928 Ford closed cab p/u chopped 8 inches and channeled 3 with a fab roof and bed. I combined race car technology and old school tech together too build this cool azz ride. Custom built 2x3 tube chassis COIL OVER SUICIDE AXLE (carrera 6063 rebound adjustable shocks with 250# springs) split 32 ford bones 32 ford axle 32 ford wheels 19" in front 17" in rear Denman white walls front disk brakes rear drum brakes Carbon fiber adjustable dual master cylinders (you can back all the rear brake out to do ripping burn outs) front and rear residual valves New FUNNY CAR cowl mounted steering box Aluminum hex rod drag links with heims Removable steer wheel 4 link totally adjustable bagged rear suspension (heim joints all around also coilover compatable) 22 gallon Bladder fuel cell with new rollover valve 3.73 gear 39 Ford Blue dot taillights Electric master switch push button start (just like a race care) new 3" aluminum radiator Electric fan 1955 Ford Y block topped with a 600 holley (runs like a dream) megaphone exhaust (no baffles) 1955 Ford-o-matic auto trans (air cooled don't have to worry about leaks) Aluminum hex rods are used for the radiator support Clean New York tag with vin plate If you are looking for that stand out rod this is it. Not another one of those black rods super cool Ford blue with 30% flat and clear coated. I can deliver with in 500 miles for $1 per mile otherwise it's up to you to secure delivery. There is a reserve, but it is about half of what it should go for. I reserve the right to end this auction at any time due to it being for sale locally. If you do not have a score of 5 or above or at least 98% positive feedback do not bid without first contacting me! Feel free to ask any questions! On Jul-14-10 at 17:07:58 PDT, seller added the following information: Things I forgot to add: 12 volt system MSD Blaster coil with resistor for the points 1 Wire alternator Custom seat covers Hiem jointed throttle linkage Racing throttle pedal Aluminum interior Removable fire wall and driveshaft tunnel On Jul-15-10 at 10:56:43 PDT, seller added the following information: So here is some more info; this is all steel, the floor is made of new 14 gauge steel braced with 1" square tubing and welded to the cab but bolted to the chassis. The bed is made of new 18 gauge steel with a 1" square tubing frame that bolts to the chassis (only 4 easy bolts to remove) there is also 8 louvers on each side and 3 in the rear. The firewall and drive shaft tunnel is made of 18 and 14 gauge steel. The bags are controlled manually from the bed, but I will include the switches and solenoids to allow internal controls. It is tagged as a 1928 Ford pickup in New York with a matching New York vin tag. On Jul-15-10 at 20:32:58 PDT, seller added the following information: Check out my video of this rod on youtube http://www.youtube.com/watch?v=4XxXAatj-e4 On Jul-16-10 at 07:46:43 PDT, seller added the following information: I just added a steering stabilizer to the ride