1987 Honda Elite

JH2HF0313HS203901

Rebuilt, Rebuildable & Reconstructed

I bought this fantastic little scooter about 2 months ago. It was wrecked, and I fixed it. The engine was rebuilt, the gauge cluster cleaned, the panels repainted. It runs great and is a blast to get around town on. Gas mileage is good, about 75mpg. Three minor things are wrong with this bike. The gauge cluster plastic has a few small cracks at the bottom. Not obscuring anything. The cracks were filled with super glue to: not show up as much, and to waterproof. The left brake lever is broken about 1/3rd from the end, resulting in only 60% remaining. The seat latch lock tumbler was busted, and so the side panel access does not work. There is a wire to open the seat and access the fuel tank and small storage space. The engine was rebuilt with all NOS Honda OEM parts. New piston, rings, crank, connecting rod, wrist pin, and cylinder. Original head, valves... All new gaskets. Run on synthetic oil only after rebuild. During rebuild all gears and wear components were inspected and found to be in tolerances. The body panels were cleaned and painted with white and clear. Not a whole lot of prep was done, so some scratches from being laid down do show up, but are not super noticeable. Overall the bike looks very sharp, starts up every time, and runs well. Damage and seat opening mechanism, or lack thereof, has been included in the last few photos. The seat cover is the one that is black and red, it was replaced only a day ago.