Detail Info for: Jeep : CJ base 1978 jeep cj-5

Transaction Info
Sold On:
01/28/2014
Price:
$ 2200.00
Condition:
Mileage:
67000
Location:
Ocala, Florida, 34479
Seller Type:
Private Seller
Vehicle Specification
Year Make Model:
1978 Jeep CJ
Submodel Body Type:
Convertible
Engine:
4.2
Transmission:
Manual
VIN:
J8F83EE043692
Vehicle Title:
Clear
Drive Train:
Fuel Type:
Standard Equipment:
Optional Equipment:
Vehicle Detail
Up for auction is a very nice just built with the following NEW products. 4 inch Rough Country suspension with N20 shocks, 1 inch body lift along 1.25 boomerang shackles. New 15 inch pro comp wheels. Brand new wiring harness from front to back with new fuse block. Jeep was sanded down to bare metal all rust repaired which was mostly on driver rocker with new sheet metal then primed and painted with Monsta -Liner white, this is great stuff for off road use it will not scratch and fade and looks good. The tub had rust on both driver and passenger floor boards which is very common for jeeps of these years both spots were about 6x8 it was cut out and also replaced with new sheet metal which then was then rhino lined in black. New fuel hoses from front to rear were replaced including main and return, fuel tank was sent out to be cleaned at radiator shop. Brakes were checked and I did nothing to them cause it looks that previous owner did redo the whole system it has front disk and rear drums. Brand new windshield frame and new windshield along with new seals. Fenders were cut to simulate a flat fender look, it looks really nice not some whack job. this unit has a tailgate option from factory which is not to common on cj5. Frame was sanded and painted with rust protection paint. Transmission has one inch drop bracket, it was installed to rid of vibration due to drivetrain alignment. Rod ends were replaced when drop pitman arm was installed. The following items are included in the sale and NOT installed new bikini top, New 1 inch shackles, New voltmeter gauge from omnix. New inner glove box. Stock oem springs and original steel wheels with 80 percent tread. It starts and runs great shifts fine and 4wd works as is should. This was a two owner stock jeep when I acquired it. Now the bad, the jeep will be sold with only one seat for the drivers side which is in real good condition the seats I used to build were master craft style which I removed to install in another project. risers and sliders are installed you will need ONE seat for passenger 125.00 new on line. It has no rear bench seat 115.00 on line. Heater switch not installed used hole on dash for off road lights I did not want to cut dash and have no need for heater. Tires are 33x 12.5 they are 25-30% tread left they were used to mock up suspension and are good for aprox 3k miles 35 inch tires will fit without any problem. I build jeeps as a hobby and being doing so since I was a kid and don't do this as a business. PLEASE READ THE FOLLOWING STATMENT CAREFULLY.... This is not a frame off restoration collector piece and not priced as such. This is an extremely functional, well built good looking unit ready for the trails or cruising around town. I have driven the jeep only 50 miles since build and suggest that all suspension bolts be checked after another 500 miles of use The reason of sale is I need the space cause I acquired another unexpected project and I already have another jeep. Please ask questions and request specific pics you may want 500 deposit within 48 hours thank you