1967 Chevrolet Camaro

327

124377N154481

Clear

1967 CAMARO - ZERO ZERO ZERO ZERO ZERO RUST........ FRAME OFF MEDIA BALST, NEW QTRS, FLOOR AND TRUCK PANS...LASER STRAIGHT READY FOR PAINT. ZERO FEEDBACK MUST CALL ME 1ST OR EMAIL, NEGATIVE FEEDBACK MUST CALL ME FIRST ORIGINALLY A 327 V-8 2SPEED POWERGLIDE CAR (BOTH ENGINE AND TRANS ARE LONG GONE) NEEDS BRAKE WAS GOING TO DO A 4 WHEEL DISC SET UP. FRONT END SUSPENSION FACTORY SPECS AND RECONDITIONED 10 BOLT FACTORY REAR END NO IDEA WHAT THE GEARS ARE THE HARD WORK IS DONE - BODY WORK IS NOT CHEAP IF YOU WANT TO BUILD A CLASSIC MUSCLE CAR AND NOT HAVE TO EVERY WORRY ABOUT RUST ISSUES, THIS IS THE CAR FOR YOU. ALL YOU REALLY NEED TO DO IS BUY THE AD ONS, BOLT THEM ON, GET THE DRIVE TRAIN IN AND PAINT IT YOU COLOR OF CHOICE AND YOU WILL HAVE A 20,000 TO 25,000 CLASSIC CAR OVER 12,000 IN THE CAR. LASER STRAIGHT AND CLEAN AS A WHISTLE HAVE ORIGINAL PROTECT-O-PLATE AND WARRANTY BOOK FROM 3-30-1967 FROM STAUFFER CHEVROLET IN SCRANTON, PA NEW STEEL COWL INDUCTION HOOD CAR IS REGISTERED WITH ANTIQUE PLATES AND HAS CLEAR CLEAN TEXAS TITLE IN MY POSSESSION CAR WILL COME WITH A GM GOOD WRENCH 350 MOTOR WITH LESS THAN 5000 MILES ON IT WITH EDLEBROCK ALUMINUM INTAKE AND HOLLEY 4 BARREL CARB. COMPLETE TURN KEY MOTOR WILL NEED A TRANSMISSION WAS A 2SPD PWR GLIDE BUT PREVIOUS OWNER MUST HAVE HAD A 350 TURBO AS THE CENTER CONSOLE SHOWS 1ST, 2ND AND DRIVE POSITIONS ALL THE BODY WORK IS DONE - JUST NEEDS FINAL PREP AND SAND AND PAINT YOUR CHOICE OF COLOR ALL GLASS IS THERE EXCEPT WINDSHIELD NEW FULL QTRS ALREADY FITTED AND INSTALLED ON THE CAR NEW INNER FENDER WELLS ON ALL FOUR CORNERS NEW SHOCKS ON ALL FOUR CORNERS NEW BODY BUSHINGS EVERYWHERE NEW RADIATOR SUPPORT AND BUSHIINGS CAR WAS COMPLETELY TORN DOWN AND MEDIA BLASTED AND PUT BACK TOGETHER AND PREPPED BUCKET SEATS CENTER CONSOLE (ONLY THE DRIVERS SEAT NEEDS TO BE PATCHED NEW FULL TRUNK PAN (INSTALLED & PREPPED) NEW FULL FLOOR PANS (INSTALLED& PREPPED) WHEELS AND TIRED ARE IN GREAT SHAPE NEEDS GAS TANK NEEDS HEADLINER NEEDS CARPET KIT NO KEYS SO WILL NEED 2 DOOR LOCKS, TRUNK LOCK AND REPLACE THE GLOVE BOX LOCK NEEDS WEATHER STRIPING HAVE ALL CHROME/STAINLESS TRIM, NEEDS A GOOD CLEAN UP WAS NOT AN A/C CAR THIS CAR IS READY FOR THE PAINT OF YOUR CHOICE, PUT IN YOUR WINDSHIELD, RECOVER THE DRIVERS SEAT INSTALL YOUR CARPET KIT AND INSTALL THE MOTOR, TRANS AND WIRE IT UP AND YOUR GOOD TO GO BODY WORK IS AWESOME AND DONE BY BODY SHOP IN PA. CONTACT ME HERE OR HOLLAR AT ME 214 335 6252 CALL OR TEXT On Oct-21-12 at 04:55:37 PDT, seller added the following information: I did a full list of parts quote to finish the car, cost for every part needed to finish and these are all upgrades, example, interior to deluxe, chrome upgrade etc..... basically everything you would need to finish and convert to 4 wheel disc would cost 5300.00