1959 Plymouth

Fury Coupe

8 - Cyl.

Unspecified

Gasoline

!959 Plymouth Savoy 2 door post rare project. It as been sitting for awhile and will need a restoration that was started a few years ago finished. The body was taken off and the frame was cleaned and painted, but that was a few years ago, it was painted with single stage paint, the paint is showing its age its faded and has some dings on trim . The body is in nice shape with one rust spot by the passenger rear wheel see pictures. The gauges are just set in the dash. A lot of work has been done but there is still a lot needed.. It has been sitting about 8 years after painting. I will need electrical, engine, brake work etc....The pictures show the interior in place but it is not bolted in, it has just been put in car for the pictures. Take a good look at the pictures and if you have any questions let me know. This is a good project for a build it your way streetrod or restorod. It was originally a 6 cylinder. The motor mounts have been shaved off in preperation for a modern engine to be fitted. The new owner will have to fabricate new engine/ transmission mounts.. So again this is a build it your way project, The front spindals were changed to 1978 Chrysler newport (for the disk brakes,will need work This car will be sold with a bill of sale only. I also have aTexas title but is for a 1959 plymouth 4 door with a different VIN then is taged on this car- the previos owner provided this with the car I have a 318 engine/ 727 transmission see pictures that will be included with the 59 plymouth, the picture shows the engine still in another car. The engine will be complete but without the headers, carb, steering pump. On May-01-12 at 14:48:58 PDT, seller added the following information: !959 Plymouth Savoy 2 door post rare project. It as been sitting for awhile and will need a restoration finished, that was started a few years ago. The body was taken off and the frame was cleaned and painted, but that was a few years ago, it was painted with single stage paint, the paint is showing its age its faded and has some dings on trim and body. The body is in nice shape with one rust spot by the passenger rear wheel see pictures. The gauges are just set in the dash. A lot of work has been done but there is still a lot needed.. It has been sitting about 8 years after painting. It will need electrical, engine, brake work etc....The pictures show the interior in place but it is not bolted in, it has just been put in car for the pictures. Take a good look at the pictures and if you have any questions let me know. This is a good project for a build it your way streetrod or restorod. It was originally a 6 cylinder. The motor mounts have been shaved off in preperation for a modern engine to be fitted. The new owner will have to fabricate new engine/ transmission mounts.. So again this is a build it your way project, The front spindals were changed to 1978 Chrysler newport with proportioning valve(for the disk brakes,will need work This car will be sold with a bill of sale only. I also have aTexas title but is for a 1959 plymouth 4 door with a different VIN then is taged on this car- the previos owner provided this with the car I have a 318 engine/ 727 transmission see pictures that will be included with the 59 plymouth, the picture shows the engine still in another car. The engine will be complete but without the headers, carb, steering pump.