1968 Datsun

2000 Convertible

4 - Cyl.

Manual

SRL311-02178

Gasoline

1968 Datsun 2000 Larger pictures www.fairladyparts.com/carpics.html Description VIN# SRL311-02178Engine # U20-02326 This is a California car in running condition. Car comes equipped as follows: Datsun 2.0 Liter U20 Motor, Numbers Matching Roadster. Title: is Clear Compression test on Motor results: Cylinder 1 150 PSI Cylinder 2 150 PSI Cylinder 3 148 psi Cylinder 4 150 psi Recent work done on car: Oil Change, New Cap, Rotor, Points, Ignition wires, and Spark Plugs. 09/2011 Carbs completely disassembled and rebuilt, Carbs were then tumbled and cleaned of old residue. Pistons from carb dome were drop matched and polished. New Needles installed both adjusted per factory specifications. New carb chamber seats. Carb Nozzles were centered to each needle mechanism is free and does not bind. New Idle screw springs and cheese head screws. New insulator block gaskets, New float bowl gasket installed. New throttle return spring, Airflow is even, checked with Uni Sync gauge. Float levels adjusted. Choke New hardware used on Carbs when they were rebuilt. 09/2011 New gaskets on carb bodies to intake. 09/2011 Intake manifold cleaned and tumbled . 09/2011 New intake manifold gasket 09/2011 New hardware installed to intake manifold. 09/2011 New Gear reduction starter installed 09/2011 New Radiator Hoses upper and lower 09/2011 New fuel Line in engine compartment 09/2011 Powdercoated Fan Shroud 09/2011 Brake system was checked and is in operating condition New hardware installed to driveline and rear axle, Grade 8. Missing items that were placed to vehicle: Hubcaps were missing and I added 4 stock hub caps to car. The Car was missing the Fan shroud and this was installed. Missing Ash tray was placed to vehicle Misiing horn button, placed original horn button to car. This car has the following extras: Nissan Competition springs, These are the OEM Nissan Comp springs not aftermarket. Rear Springs have been modified to lower vehicle in rear. Car has a Roll Bar. Electrical is in good working order, All items are in working condition All locks are in working condition and have keys. I accept Paypal for payment, buyer to pay all shipping costs, I can help you to arrange shipping. Item requires a 300 dollar deposit through Paypal at end of auction. Please call me for any questions at 209-499-9193 or email at gmagana@yahoo.com