1974 Dodge Ram Van

Minivan/Van

8 - Cyl.

Automatic

B11AT4X000000

Gasoline

1974 Dodge Tradesman 100 or B100 van I was building this van to be my parts hauler/tow vehicle, but I have run out of energy on this project. This van is currently my daily driver and I would not hesitate to drive it anywhere! The mileage was at 89,000 when I bought the van, but I changed the gages and the odometer is not working. Drivetrain- RBLT 360 with mild cam, aluminum 4bbl intake and carb, NEW headers with dual exhaust, NEW alternator, NEW starter, etc. RBLT 727 with shift kit (yes, you can feel it!). RBLT 8&3/4 rear with 3.23 open gears (NOT posi). Suspension- RBLT front and rear suspension and has been upgraded to the heavier duty B200 springs, NEW steering box, NEW Tow Package (NEW Brake controller and NEW hitch), aluminum slotted mags with tires that have a LOT of tread left. Electrical- All lights work, turn signals work except for right front, brake lights work, reverse lights worked before trans rebuild but now stay on, so I took the bulbs out until I could play with it, horn works, heat works (NEW heater core), wipers work, all gages work except for the oil pressure gage because I disconnected it to install a NEW mechanical gage with copper line and the afore mentioned odometer. Body- The body on this thing is solid which is the reason why I bought it in the first place. There is some small rust along the bottom on the DS which is visible in the pictures as well as a few bubbles along the PS roof line where they usually rot out. There is a dent near the PS taillight, but the taillight opening is not affected. The taillight fits like it is supposed to and seals to the body, so this is an easy fix. The wheel flares and front spoiler are already installed, but I have a BUNCH of extra parts to go with this that ARE included listed below! Parts that ARE included: COMPLETE aftermarket AC unit (EVERYTHING you need from the dash controls to the compressor except for the freon) NICE set of one piece headers and side pipes Aluminum rear door ladder Rear door spare tire bracket 2 tube grilles Several sets of extra headlights, taillights, parking lights, etc. NICE Wood cabinet Matching captain's chair to one shown inside van in pic 6 extra doors (1 with AC unit installed and another with popout window) NICE extra front bumper Extra gage cluster Extra dash pad and probably a bunch more that I am forgetting. ALL of my van parts will go with this sale! There is a $200 nonrefundable deposit due within 24 hrs of the auction's end. The balance is due within 2 weeks of the auction's end and must be paid before the vehicle leaves my yard. The van should be picked up by September 4, 2011. I would prefer to do local pickup, however if you need it shipped, buyer will be responsible for all shipping costs and estimates coming from 34470. If you come to pick it up locally and you find that it is not as described, you will NOT be obligated to buy it. Cars and Parts that are NOT included: I have a LOT of extra Mopar parts that I will be listing as I go through them. Below is a short list: Dart, Duster, Demon, Coronet RT, Super Bee twin scoops: This is an original set of Dodge/Plymouth twin scoops used on the 1969 and 1970 Dodge Coronet Super Bee and Coronet RT, the 1970-1972 Dodge Dart, the 1971 and 1972 Dodge Demon, and the 1970-1972 Plymouth Duster. These are in excellent condition with all studs intact and come with the bezels and 440 emblems. The numbers on the scoops are as follows: SCOOP 1- 2949195 / 95527 SCOOP 2- 2949194 / 95527 68-70 B-body 68-70 Dodge Charger parts: 69 vacuum headlight switch 68-70 DS door 68 -70 Misc interior trim 70 Plymouth Road Runner parts: 70 Road Runner hood (excellent) 70 Road Runner taillights (excellent) 70 Road Runner bubble cut from hood (NOT by me!) 71-74 B-body 71-74 Dodge Charger parts: 71-74 Door 71-74 Flat hood 71-74 Rear valance 71-74 Rear seats (1) blue (1) black 71-74 Fiberglass rear bumper with fiberglass brackets 72-74 PS fender 73-74 SE kit complete with 1/4 window inserts and louvers, and dash with factory big block VIN still attached! 72-74 Tail lights 71-74 Plymouth Road Runner, Satellite, GTX parts: 72 PS fender (rusty but straight) 71 Front clip (inner fenders, firewall, core support, front frame rails) 71 Rear valance panel 73-74 Front bumper with brackets 73-74 Front grille with parking lights and upper and lower chrome trim 73-74 Two taillight housings and one lense 70-74 E-body 70-74 Cuda and Challenger parts: 70-74 Cuda flat hood to make shaker 70-74 Cuda/Challenger column shift steering column with can and steering wheel 70-71 Cuda bumpers front and rear 72-74 Cuda bumpers front and rear A-Body Dart Duster 5x4" bolt pattern 14" rallye wheels sandblasted, painted, ready to go with trim rings and center caps. Other project cars for sale: 71 Plymouth Satellite 70 Plymouth Satellite 69 Dodge Charger 68 Chrysler Newport Will make a package deal on everything including a brand new car trailer with winch. I am planning ahead for moving out of state in another year or 2 and need to cut down on some of the "someday" projects.