Detail Info for: Ford : Mustang Mustang '67 MUSTANG FASTBACK S CODE 390 4V, 4 SPEED PROJECT CAR

Transaction Info

Sold On:
02/22/2011
Price:
$ 7100.00
Condition:
Used
Mileage:
Location:
Colchester, Connecticut, 06415
Seller Type:
Private seller

Vehicle Specification

Year Make Model:
1967 Ford Mustang
Submodel Body Type:
Mustang Other
Engine:
8 - Cyl.
Transmission:
Manual
VIN:
7FO2S1#####
Vehicle Title:
Drive Train:
Fuel Type:
Gasoline
Standard Equipment:
Optional Equipment:

Vehicle Detail

Hi, you are looking at my '67 Mustang Fastback 'rare' S (CODE) 390 4v, 4 speed car. I have the Marti Report (included) I HAVE THE TITLE IN HAND. Car purchased from Missouri approx. 4 years ago. THIS IS A PROJECT CAR!!! I took the car apart and had the body blasted and primered. Restoration needs to be finished on this car. As you can see from pics, there are pin holes of rust that need to be repaired. I have 90% of all the parts to go with this car. No motor or transmission. The original 9" rear in there! I have all tinted glass and the windshield is brand new. The car was original dark, moss green with two-toned green interior. The car has new floors; they could've done a better job welding the short front rails to the front floors, but overall not bad. RH rear qtr is new and outer wheel house new too. They did not step the top of the qtr panel (see pics). The LH qtr is original but will need some work at the bottom drop-off. The top of dash has rust issues; included is another dashboard, rust-free. All frame rails are rust-free, except the RH back by the shackle is starting to rust. There is rust on the firewall, below the cowel LH bottom (see pic) There is a rust hole in LH front corner of the rocker panel about 3" to 3" 1/2 around. All suspension and the brake system should be replaced. I have solid ford front fenders and I have the original doors LH still has the original door tag, doors need very little work some small pin holes! and a rust-free turn signal hood, a good trunk lid; but someone drilled about five holes in the lid. Not pictured: I have all roof rail mouldings (inner and outer) and should have front and back windshield mouldings too, corner end caps, upper roof vents complete, lower inserts, tail lights, heater box, and a Pop open gas cap. Included int parts (see pics): all original Ford parts, fold down seat, trap door with no holes, all around back seat fiberglass. I have the back seat and the bucket seats need to be redone. No power steering or power brakes. No AC. I will bolt in some interior, and bolt on the fenders and doors,hood, trunk lid, and put in the front and rear glass - boxing up smaller items. It is less than the Dynacorn clone bare body only, for $15,500.00 Please don't ask me for my RESERVE just bid to what this car is worth to you! I RESERVE THE RIGHT TO END THIS AUCTION EARLY IF THE CAR SELLS LOCALLY! Items missing: NO MOTOR, NO TRANS, NO TACH CLUSTER, no radiator, no carburator, no rugs, no gas tank, no headliner, no exhaust, no clutch, no presser plate nor linkages, no door panels no shifter...just rolling tire and wheels! THIS IS A PROJECT CAR!!! If your interested I have a 68 GT 390 4v, motor, and 4 Speed, toploader, for $1,500.00 extra, also a 67 tach cluster with a clock for $1,000.00 and a 4 speed console,$ 900.00 extra, ONLY IF YOU BUY THIS CAR! I've tried to explain the car as best I can. The pictures should help answer any questions you may have but feel free to email and ask any serious questions. You are welcome, and encouraged, to see the car in person or have someone look at it for you before the end of bidding. I am also selling another Ford project car, and 35 years of 67- 69 mustang and ford parts that I will be putting on ebay soon! Email me at mustangman6769@yahoo.com for more pictures, but I need your email address to send them to you. Thanks. Final bids are binding of course. I need a $500 deposit within 48 hours of the end of the auction to pay pal with the balance paid in full within seven days after the end of the auction. The balance needs to be a bank check or in person, funds will have to clear before the car is released! The car is sold AS-IS!!! Transportation and shipping costs are total responsibility of the buyer. I will put as many of the loose parts inside the car for shipping.The buyer will have to communicate with me how they want to ship everything. I can sell to other countries. Please research before the final bidding on the Mustang to make sure how a shipping company wants a car that is not running packed and prepared.

Featured Items

1969 Ford Mustang Boss 302

1969 Ford Mustang Boss 302

$69,250.00

  Watches: 159
1967 Ford Mustang

1967 Ford Mustang

$62,500.00

  Watches: 126
1970 Ford Mustang

1970 Ford Mustang

$20,000.00

  Watches: 117
1970 Ford Mustang

1970 Ford Mustang

$25,000.00

  Watches: 113