1991 Ford Mustang

LX Hatchback

Unspecified

Unspecified

1FACP42E3MF124314

Clear

Gasoline

Hello what we have here is my project car of 4 years. I was building a street strip car but have no time to finish, this car features a lot of high end parts, I will try to list everything I'm sure i will miss some things as i've added a lot over the years Lets start with the rearend it is an 8.8 housing that has been narrowed a total of 3 inches, it has been braced and straightened, it features a richmond 3:73 gear set with all new timken bearings + all new seals, it holds an auburn pro race differential 31 spline, strange S/S 31 spline axles with c-clip eliminators, 3 inch wheel studs. The rear of the car has been mini-tubbed with a wolfe racecraft mini-tub kit The suspension in the rear consists of all wolfe racecraft componets, it has a wolfe anti-roll bar fully adj. Wolfe coil over suspension with Qa1 #150 springs and Strange 10 way fully adj shocks. Wolfe double adj upper control arms, Wolfe double adj lower control arms. All control arms feature heim joints Upper and Lower torque boxes have been welded and battle boxes installed. Brand new Aerospace billet 4 piston rear disc drag brakes w/Hawk racing pads Brand new Aerospace billet 4 piston front drag disc brakes w/Hawk racing pads Brand New Set of Weld Prostar rims and Mickey Thompson Tires, Rear consist of 15x10 with mickey 325-50-15 and the front consist of 15x4 with mickey sportsman 26x7.5-15. All brand new with nipples still intact all rims have full length open face lug nuts with 3 inch race studs The Front of car features a whole bunch of race parts. The k-member has been swapped in favor of a tubular Qa1 unit with AJE tubular A-Arms, A flaming river manual steering rack and pinion with solid steering shaft, new tire rod ends, every bushing in the front has been replaced, every bearing on the car is new. Aerospace manual brake conversion kit with Aerospace manual brake master cylinder and adj master cylinder pushrod, brake pedal has been modified to work with the manual setup it was changed from a 4:1 ratio to a 7:1 ratio. The suspension on the front consists of Lakewood 90/10 drag shocks and a set of laurel mountain drag springs and a set of fully adj urp caster/camber plates. Brand new 4 inch AFCO aluminum racing radiator with Electric Fan assembly, urp Radiator hold down. Engine bay has been smoothed out and all the wiring has been hidden, sway bar mounts have been removed. Car comes with all interior panels. I don't have any seats,carpet or headliner. However interior dose feature some autometer gauges Boost,Water,Oil press and a 5 inch monster tach with shift light and warning light. Car consists of an 8 point roll cage, needs work as it was in car when i purchased. Any questions feel free to contact me my name is Rocky (260)571-8458 or e-mail me rbishir@live.com