1987 Ford Mustang

-

8 Cylinder 5.0 Liter

Manual

1fabp40a2hf177152

Gasoline

NOTE: the wheels pictured on the car are no longer available. It will be rolling on 5 lug spare rims....NOT the cobra wheels pictured I am deploying soon and need to literally give this thing away. I have a ton, and I mean a ton of parts sitting in it that will be included from cleaning out my garage. The value of all the parts sold individually is over $500 on their own. If you were to part out the parts on the car that are already put on, you would have the shell for free. Good: Clean title in hand registered non-op and zero fees due to the DMV 75% of the hard work done for a mod swap. Fuel lines, gas tank, brake lines, engine wiring and of course dash (can probobly go back to a 5.0, just have to swap computer harness and engine wiring) 1996 Cobra rearend, ($300) 5 lug converted up front ($150) UPR uppers and lowers, ($200) rear slotted rotors, ($50) lowering springs, ($50) Full dash swap, center console, ($50) carpet (rear seats were put in with an extra brace under them to fit the SN carpet, not cheesy with a gap like some people do it) ($50) All wiring done on inside, and to engine bay Hydroboost, lines, rack ect and extra parts ($100) Magnaflow catback ($150) T45 crossmember mocked and bracket welded in (T5 bracket still in place) mach 460 system sitting in the back non power windows and mirrors bumpers are good and wont need to be replaced Modular K member is swapped in, but it will need to have either Fox arms, or tubular will work as the front wheels stick out too far. The bad: Was painted white (orig blue) and it needs to be done again, still very drivable, but there are some dings worst ding is the corner pictured needs a new deck lid as the one on it was shaved for some reason and no way to lock it Driver side airbag is out of a T bird, and passenger has slit in it dash has a crack, not bad but there, the dash and center console are original black, the door panels are recovered and look nice, the rest of the pieces were painted) needs headliner, and door handles inside (it will also need seats, the ones that are pictured are no longer available, in it are another set SN95 black leather fronts, but not in great shape, no back seat, the driver side is power) and it of course needs a motor Extra parts included: about 50lbs of extra 96 cobra wiring hydroboost lines, extra rack, steering shaft, stock uppers and lowers and a bunch of other misc stuff T45 crossmember, flyweel, new clutch cable, driveshaft 4.6 GT shortblock, oilpan, valve covers, dipstick, water pump, starter, 4v heads, set of pistons, extra crank and a ton of other engine related stuff that I will throw in ( i can only give you the shortblock if your picking it up, otherwise I have no where to put it in the car) I also have the following for extra $$ bassani Catted X for 96-00 T45 trans - 350