1981 Honda CB

JH2RC010XBM200013

Clear

I'm selling my 1981 Honda CB750 motorcycle/ café racer. the bike was built by a well know builder named Pistol Pete. This is a custom bike that has been in Café Racer magazine and Pipeburn. Commute in style or take this for weekend rides. The engine is a CB750 block bored to 890 cc's with a wiseco big bore kit. It has CB900 camshafts. To keep it cool, it also has the oil cooling system from a CB900F. It is fueled by 33mm Keihin CR racing carbs. It has the stock electronic ignition with ngk plugs and wires. The sweet crossover header came with the bike,The exhaust are custom 4 into 1 Yoshimura style from a builder in Japan. The tires are Avon Distanzia's. They are hypermotard tires and have an aggressive tread pattern. I wanted something aggressive, without being knobbies. The wheels are stock CB750K wheels. The rear hub was modified to fit a norton commando rear rim. The front forks are from a CB900 They are thicker and more stable than the stock forks I just added new springs. The rear suspension was relocated forward on the rear swingarm to raise the back end approximately 1 inch. They have brand new Ikon shocks The electronics are all hidden under the tail section, including the battery, regulator, fuse block etc. I mounted a custom digital speedometer where the fuse panel used to be (on top of the handlebar clamps). It is calibrated by a magnetic sensor that reads my rear sprocket as it turns. It has clip on handlebars made for a Ninja 500 and a motion pro throttle cable. The tank and seat are from Benjie's Café Racer. The seat is made of fiberglass and the tank is steel. All maintenance has been done. the engine was rebuilt with all new seals and gaskets. Since completion it have only has about 500 miles on the bike. In the last couple years, the following have been replaced. New Battery New Spark Plugs and Cables New Fork Springs New Ikon rear shocks New 33mm Keihin CR racing carbs New Benjie Cafe Racer Steel Gas tank New 4 into 1 Yoshimura style exhaust Complete engine rebuild with new gaskets and seals Clean Title! I will include all other used and new parts and accessories that are for this bike. (turn signals included!)