1970 Chevrolet C-10

U/K

5.7L 350Cu. In. V8 GAS Naturally Aspirated

Clear

Gasoline

1970 Chevrolet C10 Pickup 1970 Base This truck was a clean truck from Oklahoma.It had some pinholes in the rocker panels and cab corners, we replaced both sides.New Good Mark doors and tail gate were used.Frame has been sand blasted and Epoxy primed. Cross-members that would not be needed have been removed to prep frame for boxing to install Pro-Touring suspension or other suspension. Bed is solid with some wrinkles between cross-members in rear, but very solid.When we sand blasted the cab, some pinholes were found inside by the top of the windshield where the roof sealer was hardest and let the moisture in. We did repair them.We have original parts with the truck (see photos), also have all New Good Mark upper and lower side trim. Please call Henry with any Questions:419.526.3132 Shop 10 am - 6 pm est419.632.3315 NOTE:There is a complete original 6 lug suspension with drum brakes, 12 bolt rear end with trailing arms and coil springs. We have all the door glass and rear window, have all the original dash components, seat belts, visors, motor (condition unknown)... NO seats, door panels, windshield, tires, wheels, or transmission. Most of these items would be of no use to us if we were to finis the build. As far as the frame, I only have pictures after we blasted it (shown). Re: The K-5 Blazer - It is not for sale ... Henry can help you get this C-10 looking, driving and handling like the Blazer! Call Henry with any questions on this build 419.632.3315 or 419.526.3132owner of Steadfast Mfg., Mansfield, Ohio 44906find us on facebook Delivery available for additional fee depending on your location.