1967 Ford Mustang

V8 Coyote Motor

Manual

Clear

1967 Mustang Fastback Eleanor Project for sale. I have over $70,000 invested including the body work labor that has been done. Almost every part that I have for the car is brand new. I have receipts for almost everything if needed. Some highlights of the build are a brand new Ford Crate Coyote motor with the control pack, a brand new TKO600 low profile transmission, a Ridetech Airride suspension (no compressor kit), and a minitub to take 18x10 rear wheels. I have listed every part I can think of that I am selling with the car below. There may be some things already on the car that are not in the list. The car comes with a 1968 Mustang Coupe title, which is clean. The car started from another person as a 67 fastback, but when i bought it the title was stamped inoperable (or something like that). The car used a coupe body for some of the parts so that is why I have the clean 68 title. I spared no expense on the build to date...I just don't have the time/money to complete it at this point. Most everything part for the car was bought at mustangstofear or cj pony parts. For details on each part, visit mustangstofear.com product catalog. They have more pics and descriptions. Let me know if you have any questions or request for pictures. Parts alone total over $50,000, not including the car itself. Buyer must arrange pickup (enclosed trailer recommended due to no windshields on the car and loose parts that I cant fit inside) 1967 Mustang Fastback --------------------------------------------------------------------------- MustangstoFear Parts Full Eleanor Kit Rear Decklid Rear Bumper Quarter Extensions Rear Valance Exhaust System Hood Pins Hood hinges with shocks Custom Engine Compartment Panels Ididit Steering Column Ididit 9 Bolt Hub Double D stainless Rod Headers Accelerator pedal bracket Brake master cylinder American Auto Wire 67-68 Mustang Wiring Kit Eleanor Body Kit Front Grille Insert 1965-1968 PIAA and Adjure Light kit PIAA 00492 (rear valance) Radiator (coyote) Radiator Bracket Set Coyote Airbox Set Coyote Reservoir Coyote Power Steering Remote Reservoir Coyote H-Pipe Mid Pipes Headliner Console Wiring 20 Gallon Fuel Cell with fuel pump and sending unit side fill Console 67-68 67-68 Mustang Console fastback Dash Pad 67-68 1967-1968 Rear Interior Panels-with roll bar application C-Pods ABS Headliner with console-67-68 Fastback Headliner back panel piece 67-68 ABS Trap Door for Sub Woofers Shifter Custom Door Panels with speaker Vintage Air Power Steering Pump kit for Coyote Motor Jack Pad Frame Stiffeners Steering column adaptor Roll Bar --------------------------------------------------------------------------- Rod & Customs Stuff Rod and Customs Crossmember for Coyote Engine Front Brake Kit RC107 Front End With Airride Setup Rear 4 Link -------------------------------------------------------------------------- Misc Pieces Aluminum Dash Kit Clutch Brake assembly GT 500 Wooden Steering Wheel - custom made in france Custom Seats from MrMikes Carrol Shelby Dash Signature Brand New Coyote motor and controls pack Alternator kit E-Stopp Parking Brake System Shelby GT500 Fender Emblem Shelby Rear LED Taillights Wilwood Rear Brake Kit RideTech RQ Shocks Electric door locks Door lock install kit RingBrothers Door Strikers Shift Knob OldAirProducts Air Conditioning Kit Autometer Fuel and Boost Gauges Mini Tub Rear Wheel Wells Rear fold down seat assembly to cover rear seating area 9" Rear end with axles Hush mat to sound deaden the entire car Speakers and Subwoofers --------------------------------------------------------------------------- CJ Pony Scott Drake Door Hinge Pin and Bushing 66 Door Hinge Bolts Trunk lid bolts FB RH LH Trunk Corner Fastback roof LH Fender RH Fender Door Shells LH Rear Full Quarter RH Rear Full Quarter Bullet style Mirrors Door handles Shelby letters Scott Drake Wiper Arms Scott Drake Wiper Blade Wiper Motor Wiper Motor Mount Wiper Motor Trans Arm Rear View Mirror Kit Wiper Switch --------------------------------------------- TRANSMISSION 1967 Mustang 5.0L TKO600 low profile 3.50:1 TKO600, Ford 2.87:1 first .64od, 26 spline input, 31 spline output,Mechanical and Electric speedo drive, (Torque rated for 600 ft/lbs,1 year warranty from the date of use) Low profile TKO Top Covers Option Synchro block ring, TKOs, Carbon lined 1-2 Shift rail mod, deeper neutral shift rail groove (use part number MD-525-1000) Repair Labor Bellhousing, Tremec, Ford 4.6/5.0L Mod/5.4 to 3550, TKOs TCCM 1899 Block plate, 4.6L/5.4L 1996-up T45, 3650, T56 Hyd Clutch master Kit, 67-70 Mustang/Cougar, LF Series Type 2 Hyd, T/O bearing, Tilton 6000 Slip-on, Ford TKO/toploader, flat face bearing (min height 1.78") Steel braided line, Double AN4 Female 24" (USA Made) FW, LBS, 4.6L, 8 bolt "small valley" 10.4"-11" pattern 96-99, 2000-up Cobra, 99-00 GT, 05-up Flywheel bolt kit, Ford 4.6/5.4L, 10mm x 1 mm x 25 mm (set of 8) Clutch set, Kevlar/Steel back Organic 11" 26 spline, light clamp, 01-04 4.6 L GT, 96-04 3.8 L (1 year warranty) Pressure plate bolt kit, 10mm, Ford 4.6L, 5.0, 5.4L with 3 safety and 3 straight dowels (set of 6) Crossmember, 1967-73 Mustang/Cougar, 3550/TKOs & AOD automatic Mount, Trans, Ford, T5/TKO/C4/Toploader Install Hardware kit, Ford TKO w/ Modulte Alum Bell Plug kit, MDL aluminum Ford speedo hole (any ford slip-in style) Harness, Electronic speedometer, Ford TKO, Ford VSS, Ford and GM T-56 Magnum Harness, Reverse Switch, Ford T-5/All TKOs/T-56, Does not fit Magnum Oil, Synchromesh, Amsoil Slip Yoke, 31 spline, 1330-16 U joint, TKO/C6/FMX *Package, 4.6/5.0 L Auto to TKO, 67-68 Mustang/Cougar