1966 Plymouth Barracuda

512

aotumatic

v852652163

Clear

1966 barracuda project well lets start with what it needs the tubbing needs to be installed brake line needs to be installed, should need two carbs ,windshield has a crack, have driveshaft for it but needs to be shuted, valve cover gaskets now the good body in real good shape paint is good not show the motor is a stroke 512 with close to 750hp has aluminum heads (pro comp) offset roller rocker (1.6) the cam a racer brown roller (674) lift compression around 13 to 1 ,has a 9" rear with 4.75 gears if your going to take in to track you would need roll cage has two bateries in trunk an 8 gal tank also lights work but no turn or brake light just in wiring never got that yet frame is streight no rust the car is realy good condition if you have any question just ask thanks the car does not run at this time when i took carbs off and stot starter fluit down the tunnel ram the car will fire up until the fluit run out everything in motor is new over $12000 in it selfthe only reason for selling i'm starting a new business back to the carb they were used when i first put them on at 9lbs the gas ran right through them i had a friend who said he could rebuild them but turn uot worse thats when i gave up