1977 Chevrolet Monza

Town coupe Coupe

5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated

Automatic

1m27b72117571

Clear

GAS

Up for sale is my 1977 Chevy Monza that I've owned for the passed 13 years and I'm only selling because I've had a back injury and can not drive it anymore and being out of work and no money coming in I could use the money for paying bills and buy some Christmas for my kids.The body on this car is in good shape for the year and is very solid, there is a little rust right behind the rear tires but an easy fix. Trunk and floorboards are solid. It does need a passenger side door replaced but I have a new G.M. door that has never been installed that goes with the car along with a truck load of other parts. The Engine it a 350 small block Chevy .40 over, it has 13:75.1 KB pistons,eagle 6.0 rods and a scat 9,000 3.48 stroke crank. the cam is a comp-cams 630 solid roller. Heads are aluminum Dart Pro 1's with 2.05-1.60 valves that has been port matched to medium race. It has a full MSD ignition along with a 6AL and a two step. The transmission is a 400TH with a reverse manual valve body with a trans-brake. It has a 3,500 stall that will go 4,600 on the brake. The rear end is a Ford nine inch with 4:88.1 with a full spool and strange axles. Here is a link so you can see the car going down the track, this was last year and the car is street legal also. http://youtu.be/5pSrj2lDjg4 If you need anymore info feel free to ask. Thanks for looking, Luke... On Nov-14-12 at 16:18:42 PST, seller added the following information: If you have any questions you can text me @ (740) 294-8983 Thanks Luke... On Nov-15-12 at 14:25:06 PST, seller added the following information: I forgot to mention that there is a car trailer that goes with the car, has all new tires and brakes on it and also has a 8,000 lb winch for pulling the car up on the trailer.So if the reserve is met all you'll have to do is bring a truck and hook up, load up the extra parts and go. Thanks Luke.. On Nov-15-12 at 18:13:19 PST, seller added the following information: I just added three more pictures, two of them is to show the radiator and fan shroud that I installed last summer and also I installed a set of billet aluminum six groove pulleys, The radiator is a Griffin that is good up to 600 H.P. The fan shroud I fabricated myself in the shop.