1986 Pontiac Fiero

Coupe

327 SBC V8

Automatic

1G2PG979XGP264819

Clear

Gasoline

Body: T-tops (only a factory option where an outside company would do the install the in 88'' models)Rear Hatch Decklid ScoopSide ScoopsAmerican Mag WheelsOther:Mr.Mikes Leather SeatsV8 Archie Conversion Kit 4 Core RadiatorMorosso Remote Oil FilterTilton Geared StarterHeadlight Control ModAlarm SystemBattery RelocatedEngine: 327 5.4L Corvette PowerplantJ&E 10.5:1 Pistons & RodsPerformance CrankCrane Competition 272 CamEdelbrock Torker II ManifoldEdelbrock Performer Carb (650) completly rebuiltWhite Performance HEI Distributer/WiresPerformance Timing Chain/GearsDouble Hump Heads W/ All new Valves/SpringsEdelbrock 120gph Quiet Flow Electric Fuel PumpHolly Adjustable 2 Way Fuel Pressure RegulatorWhite Performance Distributor + WiresHeaders + 2 resonators coming out the rearTransmission:Built to V8 Archie Specs By Jims Performance TransmissionsNew Torque Converter/Axles Suspension:Grand Am Brakes (Rotors,Calipers,Pads)Eibach Lowering SpringsPolyurethane Bushings All Around This Pontiac Fiero has been my project car for the last few years. The 327 SBC engine came out of a 1964 Chevrolet Corvette and was installed by the previous owner. I bought this car as a partially complete project and installed a brand new fuel system. I also fixed many leaks in the cooling system by cutting away the lines with holes in them and replacing with stainless steel lines. The interior of the car is in pretty good shape. The Mr. Mikes seats have a little wear on them but are in great shape. It has a sony headunit with an equalizer. Eclipse speakers all around but the amp was removed from the car and sold. The car was running and driving just fine but one day i attempted to start it and it would not even crank. I brought it to a shop very knowledgeable in fieros and after much inspection the flywheel was found to be cracked. Since the flywheel is cracked/broken the starter has nothing to spin up hence why it does not start. Im currently working full time and also going to school part time so sadly i dont have time to fix this car. The car was purchased in North Carolina near Charlotte. Oh and the T tops are custom, these cars did not come from the factory with T tops. None of the T tops leak at all. The car also has a brand new large truck battery relocated to the front hatch(probably a year old now, but was never in any other car and ive only driven this car on the weekends) The engine guages work just fine (mph and rpms) The temperature sensor is not connected so that does not read. The body is in very good shape, my neighbors dogs jumped on the car a few times and scratched up the paint but its not deep just surface. The paint is faded as well so it could definetly use a paint job. It seems the previous owner had removed the wing so i do not have it. The body of the car has NO RUST what so ever. Im talking the body panels, the under body and frame. All the power windows and lights work just fine. I have the title in hand, no liens. I know i am forgeting some details about the car, please ask me questions and i will take pictures of anything you want to see. www.photobucket.com/pontiacfiero1986 Go here for more pictures Please text me @ 301-379-7517 I will try to solve all problems and answer all questions about shipping/picking up or anything about the car. Thank you NOTE: THE CAR DOES NOT RUN, IT WILL NEED TO BE TOWED. I WILL HELP TOW THE CAR TO THE BEST OF MY ABILITY. THE BUYER MUST PICK UP THE CAR.On Aug-12-12 at 12:48:56 PDT, seller added the following information:Also not noted in the description is that im open to trades as well, it cant hurt to ask.On Aug-12-12 at 17:42:39 PDT, seller added the following information:Also the mass majority of the parts seen inside the car on the passenger side do not actually below to the Fiero. There are many intake tubes that were picked up from a junkyard as i was going to build a custom intake going to one of the vents on the side of the car. On the floor is a folded up complete replacement carpet for the rear cargo hold area that i was going to install once i finished and took out all the tools in the back.