1963 Triumph 1200 Convertible

Convertible

4 - Cyl.

Manual

GA89443LCV

Clear

Gasoline

1963 Triumph Herald 1200 Convertible In good enough condition for restorationLast driven in 1989 Here is a blurb from Wikipedia Towards the end of the 1950s Standard-Triumph offered a range of 2-seater Triumph sports cars alongside its Standard saloons, the Standard 8 & 10, powered by a small (803 cc or 948 cc) 4-cylinder engine, which by the late 1950s were due for an update. Standard-Triumph therefore started work on the Herald. The choice of the Herald name suggests that the car was originally intended to be marketed as a Standard, as it fits the model-naming scheme of the time (Ensign, Pennant and Standard itself). But by 1959 it was felt that the Triumph name had more brand equity, and the Standard name was phased out in Britain after 1963.Triumph Herald 948 Conv. (1962)Giovanni Michelotti was commissioned to style the car by the Standard-Triumph board, encouraged by Harry Webster, Chief Engineer, and quickly produced designs for a two-door saloon with a large glass area that gave 93% all-round visibility in the Saloon variant and the "razor-edge" looks to which many makers were turning. Fisher & Ludlow, Standard-Triumph's body suppliers, having become part of an uncooperative BMC, it was decided that the car should have a separate chassis rather than adopting the newer monocoque construction. The main body tub was bolted to the chassis and the whole front end hinged forward to allow access to the engine. Every panel – including the sills and roof – could be unbolted from the car so that different body styles could be easily built on the same chassis. Accordingly, in addition to the original coupé and saloon models, van, convertible and estate versions were on offer within two years.The Standard Pennant's 4-cylinder 948 cc OHV engine and 4 speed manual gearbox was used with synchromesh on the top three gears and remote gear shift and driving the rear wheels. The rack and pinion steering afforded the Herald a tight 25 feet 0 inches (7.62 m) turning circle. Coil and double-wishbone front suspension was fitted, while the rear suspension, a new departure for Triumph, offered independent springing via a single transverse leaf-spring bolted to the top of the final drive unit and swing axles.Instruments were confined to a single large speedometer with fuel gauge in the saloon (a temperature gauge was available as an option) on a dashboard of grey pressed fibreboard. The coupé dashboard was equipped with speedometer, fuel and temperature gauges, together with a lockable glovebox. The car had loop-pile carpeting and heater as standard. A number of extras were available including twincarburettors, leather seats, a wood-veneered dashboard, Telaflo shock absorbers and paint options.In late 1958, Prototype cars embarked on a test-run from Cape Town to Tangiers. An account of the journey was embellished by PR at the time.[1] However only minor changes were deemed necessary between the prototype and production cars. The new car was launched at the Royal Albert Hall, London on 22 April 1959 but was not an immediate sales success partly due to its relatively high cost, approaching £700 (including 45% Purchase Tax). In standard single-carburettor form the 38 bhp (28 kW) car was no better than average in terms of performance, delivering 60 mph (97 km/h) in about 31 seconds and a maximum speed of 70 mph (110 km/h). The rear suspension was also criticised as yielding poor handling at the extremes of performance though the model was considered easy to drive with its good vision, light steering(smallest turning circle of any production car) and controls and ease of repair.